VehiclesHPI Racing Jumpshot MT V2
HPI Racing
HPI Racing Jumpshot MT V2
1/10 scale · 120080
- Final drive
- 14.40:1
- Tire
- 120mm
Open in Top Speedverified
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 17TStock | Stock |
| Spur | 90TStock | Stock |
| Transmission & axle | 2.72:1Stock | Stock |
| Spur ÷ pinion | 5.294:1Calculated | Calculated |
| Final drive | 14.40:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 120mmStock | Stock |
| Rollout | 26.2mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not published | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not published | |
| Vehicle | ||
| Part number | 120080 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not published means it exists but no source we could find prints it.
How these numbers were settled
Brushed Saturn 12T 550. Kit page states 6- or 7-cell NiMH or 2S LiPo.
Sources
- Manual (PDF)hpiracing.com (opens in a new tab)
- stdhpiracing.com (opens in a new tab)
- 115315hpiracing.com (opens in a new tab)
- 120080hpiracing.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.