VehiclesHPI Racing Jumpshot SC Flux
HPI Racing
HPI Racing Jumpshot SC Flux
1/10 scale · 160031
- Top speed
- 55mphcalculated
- Final drive
- 10.64:1
- Tire
- 112mm
Open in Top Speedsourced
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 23TStock | Stock |
| Spur | 90TStock | Stock |
| Transmission & axle | 2.72:1Stock | Stock |
| Spur ÷ pinion | 3.913:1Calculated | Calculated |
| Final drive | 10.64:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 112mmEstimated | Estimated |
| Rollout | 33.1mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | 4000KVStock | Stock |
| Battery | Up to 3SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | 54.7mph on 3SCalculated | Calculated |
| Motor speed | 44,400rpm, no loadCalculated | Calculated |
| Vehicle | ||
| Part number | 160031 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. The top speed is kinematic: an ideal no-load RPM with no slip and no loss under load, so a real car is slower.
How these numbers were settled
Gearing is documentary; only the tire OD is inferred, because HPI lists the Jump SC tire as 2.2in/3.0in fitment with no diameter.
Sources
- stdhpiracing.com (opens in a new tab)
- Manual (PDF)hpiracing.com (opens in a new tab)
- 116522hpiracing.com (opens in a new tab)
- 160031hpiracing.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.