VehiclesAxial SCX10 III Wrangler Rubicon
Axial SCX10 III Wrangler Rubicon
1/10 scale · AXI03007
- Final drive
- 45.60:1
- Tire
- 120.4mm
Open in Top Speedsourced
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 14TStock | Stock |
| Spur | 40TStock | Stock |
| Transmission & axle | Not published | |
| Final drive | 45.60:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 120.4mmStock | Stock |
| Rollout | 8.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not published | |
| Battery | Not published | |
| Performance | ||
| Theoretical top speed | Not published | |
| Vehicle | ||
| Part number | AXI03007 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not published means it exists but no source we could find prints it.
Sources
- AXI03007horizonhobby.com (opens in a new tab)
- Manual (PDF)horizonhobby.com (opens in a new tab)
- AXI43010horizonhobby.com (opens in a new tab)
Every figure on this page traces to one of these.