VehiclesKyosho Outlaw Rampage PRO 2.0
Kyosho Outlaw Rampage PRO 2.0
1/10 scale · 34365
- Final drive
- 12.65:1
- Tire
- 108mm
Sold without a motor, so there is no stock KV: compare gearing by rollout.
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| Drive | 2WD | |
| Power | Motor not included | |
| Build | Roller / ARR | |
| Scale | 1/10 | |
| Part number | 34365 | |
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 12.65:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 108mmStock | Stock |
| Rollout | 26.8mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
An assembled kit version of the Outlaw Rampage PRO 2WD truck, released in July 2026 and described as about 70 percent factory assembled.
- Kyosho's Technical Data gives a 12.65:1 gear ratio and a 108 by 38mm tire, with a weight of about 2,600 grams.
- The radio system, speed controller, motor and battery are all sold separately.
- No pinion, spur or transmission figures are printed, so they are left blank.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.