VehiclesTraxxas LaTrax Desert Prerunner

Traxxas

Traxxas LaTrax Desert Prerunner

1/18 scale · short course truck · 76064-5

Final drive
16.94:1
Traxxas LaTrax Desert Prerunner
Photo: Traxxas

Specifications

Last modified

SpecValueBasis
Drivetrain
Pinion9TStockStock
Spur61TStockStock
Transmission & axle2.50:1StockStock
Final drive16.94:1StockStock
Wheels & tires
Tire diameterNot published
Wheel hex12 mmStockStock
Power
MotorNot applicable
Motor shaftNot published
BatteryNot published
Stock motor370 brushedStockStock
Stock ESCLaTrax waterproof ESC (3045R)StockStock
Battery space102 × 35 × 18 mmmax pack, L × W × HStockStock
Performance
Theoretical top speedNot applicable
Chassis
Weight0.57 kg (1.3 lb)StockStock
Length313 mm12.3 inStockStock
Width171 mm6.7 inStockStock
Height122 mm4.8 inStockStock
Wheelbase179 mm7 inStockStock
Vehicle
Part number76064-5
Scale1/18
ClassShort course truck

Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.

Gearing parts

Pinion and spur parts for the Traxxas LaTrax Desert Prerunner: fitted, and optional gearing supplied in the box
ComponentTeethPitchBorePart number
Fitted at the factory
Pinion9TMod 0.5Not published7644 (opens in a new tab)
Spur61TMod 0.5Not applicable7641 (opens in a new tab)

Tooth counts are the ones in the specifications above. Pitch is given as metric module (Mod 1, Mod 0.8) or diametral pitch (32P, 48P). They are different standards and are not interchangeable, even where the numbers look close. Bore is the pinion’s hole, listed separately from the motor shaft. Linked part numbers go to the maker's or official distributor's page for that part.

How these numbers were settled

The Traxxas spec table prints 'Gear Ratio (Internal): 2.5:1' and, on the transmission row, '10-T pinion / 60-T spur', but the parts list sets the 9-T pinion (7644) and the 61-tooth spur (7641) in regular type as supplied, and both part pages list the Desert Prerunner as a stock fitment, with the 10T and 60T gears as accessories.

Documents

Sources

Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.

More from Traxxas