VehiclesTeam Associated RC300-BD Racing Kit

- Scale
- 1/8
- Drive
- 2WD
- Max LiPo
- -
- Power
- nitro
Background
The RC300-BD paired Associated’s flat-pan on-road chassis with an adjustable ball differential. The factory’s historical catalog identifies kit 2002 and its 2850 differential, distinguishing this car from the solid-axle RC300 described in the older assembly instructions. The kit was offered without an engine, radio or body. Period factory catalog (opens in a new tab)
Read moreShow less
For restoration, identify the axle assembly before ordering drivetrain pieces. The shared historical catalog contains separate RC300 rear-end, wheel, brake and ball-differential sections alongside RC500 equipment. Differential-specific gears and thrust components belong to the BD assembly; a common page or familiar RC300 name does not establish that every listed part belongs in both configurations. Period factory catalog (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Street | |
| Drive | 2WD | |
| Power | Nitro | |
| Build | Kit | |
| Scale | 1/8 | |
| Part number | 2002 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Differentials | Ballrear; Exact2002 RC300-BD; not the earlier2750 RC300-D differential.Stock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Suspension | ||
| ||
| Chassis | PlateStock | Stock |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Identify the 2850 ball differential before rebuilding the rear assembly. The original differential sheet shows its thrust-bearing, wheel-hub and axle arrangement and includes separate instructions for adapting an earlier RC300-D. Check the matched differential components and the brake clearance, rather than mixing parts from the 2750 and 2850 assemblies. Use the earlier chassis instructions alongside the differential and clutch supplements.[1] RC300-BD Racing Kit factory assembly material (opens in a new tab)[2] RC300-BD Racing Kit factory assembly material (opens in a new tab)
OEM parts
Drivetrain
8Differential balls, 5/32 in
Roller thrust bearing, 5 x 12 mm
Aluminum axle locknut
Differential gear, 58T
Differential gear, 61T
Differential gear, 63T
RC300 dual-disc brake kit, solid axle and ball differential
Wheels & tires
6RC300 ball differential with rear wheels and tires
RC300 ball differential without wheels and tires
RC300-BD left and right rear wheels and tires
RC300-BD left and right rear wheels
RC300-BD right rear wheel
RC300-BD right rear wheels and tires
Hardware & seals
6Right rear wheel screws and lock washers
Axle with washer hub installed
Right differential wheel hub with roller bearing and screw
Differential ball thrust washers
Roller thrust bearing small washers
Belleville cone thrust washers
20 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Shared earlier solid-axle RC300 instructions; the BD differential must be researched separately.
Sources
4 source links for this model.
Read moreShow less
- Manuals and service bulletins.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
2- Earlier RC300 chassis instructions; supplement covers the 2850 differential (opens in a new tab)Supports 1 specificationUsed forMain specs
- Original RC300 2850/2851 differential and RC300/BD clutch instructions (opens in a new tab)Supports 1 specificationUsed forMain specs
Parts and electronics
2- Period factory catalog (opens in a new tab)Supports 1 specificationUsed forMain specsBackground
- Cat RC500 (PDF) (opens in a new tab)Supports 2 specificationsUsed forDrivetrainSuspension
