Explore the catalog

VehiclesTamiya Egress (1989)

Tamiya

Tamiya Egress (1989)

1/10 scale · buggy · 58079

Production status: Unknown
Scale
1/10
Drive
4WD
Max LiPo
-
Power
electric

Background

The original Egress extends Tamiya's late-1980s four-wheel-drive racing-buggy line. It follows the Avante in the manufacturer's history, with a longer, competition-oriented layout and a low polycarbonate body. This sheet covers the 58079 original rather than the 58583 rerelease or a later Black Edition. Original instructions (opens in a new tab). Rerelease history (opens in a new tab).

Read moreShow less

Its original instructions include a dedicated setup section covering tires, suspension balance, camber, springs and gearing. The advice treats adjustments as a connected setup rather than isolated upgrades. The original gearing chart also belongs to this edition; the later kit's printed ratio should not silently replace it. Original instructions (opens in a new tab).

A restoration should begin with the condition and identity of the decks, suspension arms, dampers and differential assemblies. Keep original service numbers separate from later replacements until an actual dimensional or manufacturer bridge is available. When preparing a runner, establish a smooth, repeatable suspension baseline before changing power and gearing together. Original instructions (opens in a new tab).

About these specs

Original 58079 edition. Do not substitute later rerelease gearing, body finish or installed equipment without an exact component bridge.

Sources

2 source links for this model.

Read moreShow less
  • Manuals and parts lists.
  • Individual part and electronics specifications.

Links open in a new tab.

Maker documents

1

Parts and electronics

1

Source details