The original Avante was Tamiya's elaborate four-wheel-drive racing buggy of 1988. The original assembly instructions specify an FRP double-deck chassis, a mid-mounted Technigold motor and oil-filled dampers, making it a distinct technical edition from the later carbon-deck rerelease. Original instructions (opens in a new tab). Rerelease history (opens in a new tab).
Read moreShow less
Adjustable double-wishbone suspension, a center ball differential and cam-lock wheels gave the original a more complicated build than Tamiya's simpler off-road kits. Its compact layout rewards careful linkage and differential assembly. A car with later wheels, shafts or carbon plates should be identified by its installed components rather than by the body alone. Original instructions (opens in a new tab).
For restoration, start with the original 58072 parts drawings and record what remains on the chassis before ordering replacements. Preserve sound period parts if originality is the goal. A regular runner can use appropriately selected modern radio equipment, but the 2011 service card is not a complete replacement inventory for this original version. Original instructions (opens in a new tab).
The kind of vehicle the maker sells it as. It sets what the car is built to do and which cars it is fair to compare it with.
Buggies are low, light off-road cars built for jumps and fast corners on dirt, clay or turf tracks.
Drive
All four wheels are driven. That gives more grip under power, especially on loose ground.
The cost is more parts to maintain.
Power
A brushed motor carries current through carbon brushes that rub on the commutator.
It is cheaper and smooth at low speed.
The brushes wear and the motor loses power over time.
Build
A kit you build yourself from parts.
Most kits come without motor, ESC, servo, radio and battery, and many without tires or a painted body.
The manual lists what to add.
Scale
The maker's nominal size compared with a full-size vehicle. It works more as a class label than a measurement.
A 1/10 monster truck is far bigger than a 1/10 touring car, so compare length and weight for real size.
Part number
The maker's product number for this exact version.
A V2, a new color, or a kit instead of an RTR usually has a different number, and parts can differ between them.
Check it against your box or receipt before ordering parts.
Class
Buggy
Drive
4WD
Power
Brushed
Build
Kit
Scale
1/10
Part number
58072
Drivetrain
Pinion
The small gear on the motor shaft. Fewer teeth gear the car shorter: quicker acceleration, lower top speed and a cooler motor. More teeth do the opposite.
It depends on the motor you fit, so the maker does not list one.
Spur
The large gear the pinion drives. A bigger spur with the same pinion gears the car shorter.
Pinion and spur must have the same pitch, or tooth size, to mesh.
Transmission & axle
Every reduction after the spur, multiplied together: transmission, differentials and axle gears.
It is fixed by the design; the gearing you change is the pinion and spur.
Final drive
How many times the motor turns for one turn of the wheels. A higher number is shorter gearing: more acceleration and pulling power, less top speed.
Pinion
Not published
Spur
Not published
Transmission & axle
Not published
Final drive
Not published
Wheels & tires
Tire diameter
The outside diameter of the mounted tire, tread to tread. A taller tire covers more ground each turn, which gears the car taller.
Race tires wear down over a day, and a smaller tire gears the car shorter.
Tire diameter
Not published
Power
Motor
Brushed motors are commonly described by can size and turns. No motor KV is published for this vehicle; turns alone cannot supply an exact value.
Battery
The highest LiPo cell count the maker rates the electronics for.
The maker does not publish it.
Stock motor
The motor fitted at the factory, as the maker names it.
Brushed motors are often named by can size, such as 540 or 550, and by turns: fewer turns is faster.
Theoretical top speed is unavailable because motor KV, rated battery cell count, stock tire outside diameter and complete final drive ratio are missing.
Enter the missing inputs in the calculator to work out a theoretical speed.
Theoretical top speed
Not published
How to read these figures
Stock is as the vehicle ships.
Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
Not published means it exists but no source we could find prints it.
Upgrades and setup
An incomplete original Avante can become a parts-sourcing project before it becomes a runner. One restoration described missing motor mounts, wheels, cam locks and incorrect screws, as well as a previous change to the suspension ball connectors. Check completeness and identify earlier modifications before stripping the car. A tidy body does not show whether the difficult mechanical pieces are present.[1] TamiyaClub 58072 original-model reports (opens in a new tab)
Forums & communities
TamiyaClub
Historical original-model reviews; individual modified cars and old availability claims are not universal facts.
14 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Original 58072 edition. Do not substitute later rerelease gearing, body finish or installed equipment without an exact component bridge.