VehiclesKyosho MINI-Z MA-020VE PRO SP (MHS/ASF Compatible 2.4GHz System) Chassis Set
Kyosho MINI-Z MA-020VE PRO SP (MHS/ASF Compatible 2.4GHz System) Chassis Set
touring · 32171
Reference price≈ USD 215.70Converted from JPY 34,100
- Original listing
- JPY 34,100Price source (opens in a new tab)
Currency estimate using ECB rates (opens in a new tab) (2026-10-06). Regional taxes, shipping and import costs are not adjusted.
Reference prices; current prices may differ.

- Scale
- -
- Drive
- 4WD
- Max LiPo
- -
- Motor Kv
- 8,500
Background
The MA-020VE PRO SP expanded the PRO package with equipment that had previously been optional. Kyosho's Japanese listing dates it toNovember 2016. The 8500KV brushless motor is retained, while the supplied cooling sleeve, motor cover, gyro and wide rear suspension arms distinguish it from the ordinary PRO chassis set. Kyosho model information (opens in a new tab).
Read moreShow less
The special package uses red-anodized motor cooling hardware and a black main chassis. Kyosho also lists nickel-plated hex screws and aluminum motor-holder components. These are concrete package differences, rather than evidence that every component carries a different geometry or that the car has a higher permitted race classification. Kyosho model information (opens in a new tab).
MHS and ASF radio modes are supported, with the mode depending on the transmitter. Body, wheels, tires and transmitter are separate, so a usable setup reference must describe those choices alongside the pinion and spur. Check the wide rear arm arrangement and selected wheel offsets before moving a narrow-body configuration onto the SP. Kyosho model information (opens in a new tab).
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 4WD | |
| Power | Brushless | |
| Build | Roller / ARR | |
| Part number | 32171 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Pinion range | 15 to 21T on a 27, 29 or 31T spur, the maker's limitStock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | 8500KVStock | Stock |
| Battery | Not published | |
| In the box | ||
| ||
| Radio | Not includedStock | Stock |
| Drive battery | Not includedStock | Stock |
| Also in the box | Factory-assembled chassis with installed motor and electronics; consult exact supplied wheel/tire contents and required body/radioStock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Weight | 0.14 kg (0.3 lb)Stock | Stock |
| Length | 126 mm5 inStock | Stock |
| Width | 65 mm2.6 inStock | Stock |
| Height | 29 mm1.1 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Keep the pinion, spur and molded motor-holder position as a complete combination. The VE PRO manual recommends the conservative 15T/31T setup to limit brushless-motor load and warns that taller gearing adds heat. The chart describes available combinations rather than promising that every one suits a small indoor course.[1] Factory configuration-specific instructions (opens in a new tab)
Use the DWS rear suspension adjustments one at a time. Changing the upper-arm length alters camber, the angle of the tire viewed from the rear; changing the suspension holder alters toe. Spring spacers adjust ride height, while a different spring changes roll and pitch response. Check smooth arm and shock movement after reassembly before using these adjustments to address handling.[1] Factory configuration-specific instructions (opens in a new tab)[2] Exact numbered product and supplied configuration (opens in a new tab)
OEM parts
Drivetrain
14Pinion & Spur Gear Set(MINI-Z AWD)
Ti64 Center Shaft & Pinion Gear(MINI-Z A
Machine Cut Spur Gear Set L (MINI-Z AWD/
Machine Cut Spur Gear Set M (MINI-Z AWD/
Hard Diff. Cup Joint (MINI-Z AWD/L,R)
Bevel Gear (for Front OneWay/1pcs)
Maintenance Kit(for Ball Diff)
Suspension
9Front Suspension Arm Set(for MA-020)
Front Suspension Shaft Set(for MA-020)
Rear Suspension Arm(AWD DWS)
Upper Rod & Suspension Shaft Set(AWD DWS
Rear Long Sus.Arm Set(for AWD DWS)
Inner Tube Shock (AWD DWS)
DWD Shock Spring Spacer(0.5mm/6pcs)
SP Suspension Bush(for AWD DWS)
Steering
3Servo Saver Assy(MINI-Z AWD)
Servo Gear Miniz
Servo Gear Shaft Set
Electronics
7Receiver Cover Set (MA-020VE)
Aluminum Motor Holder Set (MINI-Z AWD/#3
Aluminum Motor Holder SetⅡ(MINI-Z AWD)
Aluminum Motor Holder SetⅡ(MINI-Z AWD)
Aluminum Motor Cover (MINI-Z AWD/Orange)
Brushless Motor(Xspeed VE)
Aluminum Brushless Motor Sleeve
Wheels & tires
21Wheel Shaft(AWD/1Pcs)
MINI-Z Tire Tape 5M for Narrow
MINI-Z Tire Tape 5M for Wide
TE37 Wheel Narrow Off-Set 0.5 mm Bronze
TE37 Wheel Narrow Off-Set 0.5 mm Silver
TE37 Wheel Narrow Off-Set 1.0mm Bronze
TE37 Wheel Narrow Off-Set 1.0mm Silver
TE37 Wheel Narrow Off-Set 1.5mm Bronze
Chassis & body
7Universal Swing Shaft(4Pcs/MINI-Z AWD)
Long Universal Swing Shaft(2Pcs/MA-020)
Swing Shaft&Joint(AWD/1Pcs)
Hard Universal Swing Shaft(MINI-Z AWD/2pcs)
Rear Chassis Set(AWD DWS)
Hard Long Universal Swing Shaft(2pcs)
Long Swing Shaft&Joint Set(1Pcs/MA-020)
Hardware & seals
4TP Bind Screw (M2.0x6/10pcs)
TP Bind Screw (M2.0x8/10pcs)
Screw Set(MINI-Z AWD)
Screw Set (AWD DWS)
Unclassified
16Small Parts Set(AWD/Black)
Front Upper Bulk Cover Set(for MA-020)
R/C Unit Set(MA-020VE PRO/RA-35)
Front Oneway Unit (MINI-Z AWD)
Joint Cup (for Front OneWay/2pcs)
Setting Spring Set(AWD DWS)
Alum Rear Sus Holder(DWS/Caster 0/Toe 2)
Alum Rear Sus Holder(DWS/Caster 0/Toe 3)
81 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Sources
2 source links for this model.
Read moreShow less
- Manuals.
- Vehicle product and specification pages.
Links open in a new tab.
Maker documents
1This vehicle
1- Kyosho MINI-Z MA-020VE PRO SP (MHS/ASF Compatible 2.4GHz System) Chassis Set product page (opens in a new tab)Supports 5 specificationsUsed forMain specsWeightSizeDrivetrainIn the boxBackground
