VehiclesKyosho MA-020VE PRO Chassis Set
Kyosho MA-020VE PRO Chassis Set
touring · 32170
Reference price≈ USD 187.87Converted from JPY 29,700
- Original listing
- JPY 29,700Price source (opens in a new tab)
Currency estimate using ECB rates (opens in a new tab) (2026-10-06). Regional taxes, shipping and import costs are not adjusted.
Reference prices; current prices may differ.

- Scale
- -
- Drive
- 4WD
- Max LiPo
- -
- Motor Kv
- 8,500
Background
The MA-020VE PRO followed the brushless MA-020VE with MHS2.4GHz radio support. Kyosho's product listing dates it toNovember 2015 and retains the 8500KV motor, VCS front suspension and DWS rear suspension. Its R/C electronics are included, but a transmitter and body/wheel/tire package are not. Kyosho model information (opens in a new tab).
Read moreShow less
The PRO also accepts the older ASF system. Kyosho distinguishes the quicker MHS response with the EX-6 transmitter from the ASF behavior used with a KT-18. The transmitter therefore affects the operating mode, and the PRO label alone is insufficient when selecting a radio or diagnosing pairing problems. Kyosho model information (opens in a new tab).
Multiple pinion, spur, wheelbase and front-width parts are included. The useful starting point for an existing car is its assembled configuration and tire package, followed by the matching motor-holder and gear combination. Retain those details when comparing setups with another MA-020, because a shared chassis name does not make their rollout equal. Kyosho model information (opens in a new tab).
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 4WD | |
| Power | Brushless | |
| Build | Roller / ARR | |
| Part number | 32170 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Pinion range | 15 to 21T on a 27, 29 or 31T spur, the maker's limitStock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | 8500KVStock | Stock |
| Battery | Not published | |
| In the box | ||
| ||
| Radio | Not includedStock | Stock |
| Drive battery | Not includedStock | Stock |
| Also in the box | Factory-assembled chassis with installed motor and electronics; consult exact supplied wheel/tire contents and required body/radioStock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Weight | 0.13 kg (0.3 lb)Stock | Stock |
| Length | 126 mm5 inStock | Stock |
| Width | 65 mm2.6 inStock | Stock |
| Height | 29 mm1.1 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Keep the pinion, spur and molded motor-holder position as a complete combination. The VE PRO manual recommends the conservative 15T/31T setup to limit brushless-motor load and warns that taller gearing adds heat. The chart describes available combinations rather than promising that every one suits a small indoor course.[1] Factory configuration-specific instructions (opens in a new tab)
Use the DWS rear suspension adjustments one at a time. Changing the upper-arm length alters camber, the angle of the tire viewed from the rear; changing the suspension holder alters toe. Spring spacers adjust ride height, while a different spring changes roll and pitch response. Check smooth arm and shock movement after reassembly before using these adjustments to address handling.[1] Factory configuration-specific instructions (opens in a new tab)[2] Exact numbered product and supplied configuration (opens in a new tab)
OEM parts
Drivetrain
14Pinion & Spur Gear Set(MINI-Z AWD)
Ti64 Center Shaft & Pinion Gear(MINI-Z A
Machine Cut Spur Gear Set L (MINI-Z AWD/
Machine Cut Spur Gear Set M (MINI-Z AWD/
Hard Diff. Cup Joint (MINI-Z AWD/L,R)
Bevel Gear (for Front OneWay/1pcs)
Maintenance Kit(for Ball Diff)
Suspension
9Front Suspension Arm Set(for MA-020)
Front Suspension Shaft Set(for MA-020)
Rear Suspension Arm(AWD DWS)
Upper Rod & Suspension Shaft Set(AWD DWS
Rear Long Sus.Arm Set(for AWD DWS)
Inner Tube Shock (AWD DWS)
DWD Shock Spring Spacer(0.5mm/6pcs)
SP Suspension Bush(for AWD DWS)
Steering
3Servo Saver Assy(MINI-Z AWD)
Servo Gear Miniz
Servo Gear Shaft Set
Electronics
6Receiver Cover Set (MA-020VE)
Aluminum Motor Holder Set (MINI-Z AWD/#3
Aluminum Motor Holder SetⅡ(MINI-Z AWD)
Aluminum Motor Holder SetⅡ(MINI-Z AWD)
Aluminum Motor Cover (MINI-Z AWD/Orange)
Brushless Motor(Xspeed VE)
Wheels & tires
1Wheel Shaft(AWD/1Pcs)
Chassis & body
7Universal Swing Shaft(4Pcs/MINI-Z AWD)
Long Universal Swing Shaft(2Pcs/MA-020)
Swing Shaft&Joint(AWD/1Pcs)
Hard Universal Swing Shaft(MINI-Z AWD/2pcs)
Rear Chassis Set(AWD DWS)
Hard Long Universal Swing Shaft(2pcs)
Long Swing Shaft&Joint Set(1Pcs/MA-020)
Hardware & seals
2Screw Set(MINI-Z AWD)
Screw Set (AWD DWS)
Unclassified
14Small Parts Set(AWD/Black)
Front Upper Bulk Cover Set(for MA-020)
R/C Unit Set(MA-020VE PRO/RA-35)
Front Oneway Unit (MINI-Z AWD)
Joint Cup (for Front OneWay/2pcs)
Setting Spring Set(AWD DWS)
Alum Rear Sus Holder(DWS/Caster 0/Toe 2)
Alum Rear Sus Holder(DWS/Caster 0/Toe 3)
56 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Sources
2 source links for this model.
Read moreShow less
- Manuals.
- Vehicle product and specification pages.
Links open in a new tab.
Maker documents
1This vehicle
1- Kyosho MA-020VE PRO Chassis Set product page (opens in a new tab)Supports 5 specificationsUsed forMain specsWeightSizeDrivetrainIn the boxBackground
