VehiclesKyosho Fantom PZF T-33
Kyosho Fantom PZF T-33
1/12 scale · 30640
- Final drive
- 3.38:1
- Tire
- 53mm
Sold without a motor, so there is no stock KV: compare gearing by rollout.
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| Drive | 4WD | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/12 | |
| Part number | 30640 | |
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 3.38:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 53mmStock | Stock |
| Rollout | 49.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
A 1/12 electric 4WD pan car released in December 2025 that combines the Plazma chassis and rear suspension with the Fantom driveline.
- Kyosho's Technical Data gives a 3.38:1 gear ratio and a rear tire of 53 by 35mm, while the front is 48 by 23mm, with an adjustable wheelbase of 201 to 202mm and a weight of about 900 grams.
- Tires are included, but the motor, speed controller and battery are sold separately, and no pinion, spur or transmission figures are printed.
- It shares its gear ratio and tire sizes with the Plazma MK.3 Limited alpha-2.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.