VehiclesKyosho Inferno MP10e TKI2
Kyosho Inferno MP10e TKI2
1/8 scale · buggy · 34116
- Final drive
- 10.14:1
Sold without a motor, so there is no stock KV: compare gearing by rollout.
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| Class | Buggy | |
| Drive | 4WD | |
| Power | Motor not included | |
| Scale | 1/8 | |
| Part number | 34116 | |
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 10.14:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
A 1/8 electric 4WD race buggy kit released in January 2023 and since discontinued.
- Kyosho's Technical Data gives a 10.14:1 gear ratio and a weight of about 3,650 grams.
- The kit includes a pinion gear, but Kyosho does not print its tooth count, and the spur count and transmission ratio are not published.
- Tires, the motor and the electronic speed controller are sold separately, and no tire size is printed.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.