VehiclesHPI Racing Savage X Flux V2
HPI Racing
HPI Racing Savage X Flux V2
1/8 scale · 160101
- Top speed
- 60mphcalculated
- Final drive
- 15.17:1
- Tire
- 160mm
Open in Top Speedverified
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 16TStock | Stock |
| Spur | 43TStock | Stock |
| Transmission & axle | 5.64:1Stock | Stock |
| Spur ÷ pinion | 2.688:1Calculated | Calculated |
| Final drive | 15.17:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 160mmStock | Stock |
| Rollout | 33.1mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | 2200KVStock | Stock |
| Battery | Up to 6SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | 60.3mph on 6SCalculated | Calculated |
| Motor speed | 48,840rpm, no loadCalculated | Calculated |
| Vehicle | ||
| Part number | 160101 | |
| Scale | 1/8 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. The top speed is kinematic: an ideal no-load RPM with no slip and no loss under load, so a real car is slower.
How these numbers were settled
Flux MLH-2200 with the ELH-6S 150A ESC, run on two packs for 6S. Pinion is 1-module.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.