VehiclesTamiya The Bigwig (2017)
Tamiya The Bigwig (2017)
1/10 scale · buggy · 47330
Reference price≈ USD 177.12Converted from JPY 28,000
- Original listing
- JPY 28,000Price source (opens in a new tab)
Currency estimate using ECB rates (opens in a new tab) (2026-10-06). Regional taxes, shipping and import costs are not adjusted.
Reference prices; current prices may differ.

- Scale
- 1/10
- Drive
- 4WD
- Max LiPo
- -
- Power
- -
Background
The Bigwig (2017) returns Tamiya's 1986 tenth-anniversary buggy to the range. Its body retains Takuya Yura's broad aerodynamic shape, with Mooncraft markings and the imitation engine and exhaust details behind the cockpit. A later production run can carry the same 47330 kit number; the current Japanese page separately records the edition's first release in March 2017. Factory model information (opens in a new tab). Assembly manual (opens in a new tab).
Read moreShow less
The shaft-driven four-wheel-drive chassis keeps the rack-and-pinion steering that distinguished the original. Four CVA oil dampers and a full set of drivetrain ball bearings are included. The front and rear wishbone arrangements remain visibly different, with the body and chassis working together to create a model that has more unusual mechanical detail than a conventional modern bathtub buggy. Factory model information (opens in a new tab). Assembly manual (opens in a new tab).
This reissue supplies a dedicated 25-turn GT-Tuned motor and uses an electronic speed controller purchased separately. Its original predecessor used a Technigold motor and mechanical controller, so electrical completion details are edition-specific. The instructions give both 13T and 15T gearing arrangements, with the necessary set-plate changes; there is no need to reduce those two supported choices to one assumed factory pinion. Factory model information (opens in a new tab). Assembly manual (opens in a new tab).
The enclosed electronics and rack steering make careful installation worthwhile. Keep the rack boots and lubrication in good condition, and check controller height before choosing electronics for the standard position. The large body is part of the attraction, but it also means a physically small receiver and controller can make maintenance and cable routing easier. Factory model information (opens in a new tab). Assembly manual (opens in a new tab).
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Buggy | |
| Drive | 4WD | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | 47330 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Differentials | Gearfront and rearStock | Stock |
| Pinion range | 13 to 17T, the maker's limitStock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | 88mmStock | Stock |
| Stock tire width | Front 30; rear 38mmStock | Stock |
| Suspension | ||
| ||
| Chassis | CompositetubStock | Stock |
| Shocks | Oil-filledfront and rearStock | Stock |
| Shock oil | #400 (maker grade)front and rearStock | Stock |
| Power | ||
| ||
| Motor | Not published | |
| Motor shaft | Not published | |
| Battery | Not applicable | |
| Stock motor | GT-Tuned (25T)Stock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Weight | 1.34 kg (3 lb)without batteryStock | Stock |
| Length | 390 mm15.4 inStock | Stock |
| Width | 235 mm9.3 inStock | Stock |
| Height | 140 mm5.5 inStock | Stock |
| Wheelbase | 262 mm10.3 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Service reference
Checked task pages, documented requirements and recorded factory fluids for this model. Follow the manufacturer's procedure for the exact assembly and revision.
MotorReference
Motor mount and pinion installation
The Bigwig (2017) exact kit 47330; original/reissue equipment kept distinct
Motor mount and pinion installation reference for this numbered factory edition. This does not prescribe a replacement interval or identify an owner-selected electronic component.
- The Bigwig (2017) factory assembly manual, PDF p. 7 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: Tamiya 47330 The Bigwig (2017).
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-16.
ShocksReference
Oil damper assembly
The Bigwig (2017) exact kit 47330; original/reissue equipment kept distinct
Oil damper assembly reference for this numbered factory edition. This does not prescribe a replacement interval or identify an owner-selected electronic component.
- The Bigwig (2017) factory assembly manual, PDF p. 16 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: Tamiya 47330 The Bigwig (2017).
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-16.
DifferentialsReference
Differential assembly
The Bigwig (2017) exact kit 47330; original/reissue equipment kept distinct
Differential assembly reference for this numbered factory edition. This does not prescribe a replacement interval or identify an owner-selected electronic component.
- The Bigwig (2017) factory assembly manual, PDF p. 6 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: Tamiya 47330 The Bigwig (2017).
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-16.
Steering servoReference
Steering servo and linkage installation
The Bigwig (2017) exact kit 47330; original/reissue equipment kept distinct
Steering servo and linkage installation reference for this numbered factory edition. This does not prescribe a replacement interval or identify an owner-selected electronic component.
- The Bigwig (2017) factory assembly manual, PDF p. 12 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: Tamiya 47330 The Bigwig (2017).
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-16.
Shock fluid reference
- front
- #400 (maker grade)Stock
Sources (1)
- rear
- #400 (maker grade)Stock
Sources (1)
Fluid quantities, torque settings and service intervals have not been recorded in this reference.
Manuals & assembly references
Indexed tasks link to checked physical PDF pages. Other links open full documents. Tasks and rebuild requirements not shown here still need review.
Build and setup
Factory setup guide for this configuration.
The 2017 Bigwig already includes drivetrain ball bearings and CVA oil dampers. Keep those parts if they are serviceable. Its distinctive rack steering needs clean sliding surfaces, intact boots and the specified lubrication before extra servo torque is useful.[1] Exact numbered factory assembly manual (opens in a new tab)[2] Factory design history and exact reissue context (opens in a new tab)
Fit the controller and receiver around the standard equipment layout. The reissue uses a separately selected electronic controller and a dedicated GT-Tuned motor. The ordinary 53779 motor is listed as a service reference, but the manual explicitly says the kit's special-edition motor is not sold separately.[1] Exact numbered factory assembly manual (opens in a new tab)[2] Factory design history and exact reissue context (opens in a new tab)
Read moreRead less about build and setup for The Bigwig (2017)
Choose either documented pinion installation deliberately. The manual gives 10.043:1 with 13T and 8.704:1 with 15T, using different set-plate arrangements. Start with the shorter ratio if the intended surface loads the motor heavily, and confirm free gear rotation after fitting the plates.[1] Exact numbered factory assembly manual (opens in a new tab)[2] Factory design history and exact reissue context (opens in a new tab)
Follow the separate front-short and rear-long damper instructions. The kit-standard oil is labeled #400; that is a manufacturer grade rather than a verified cSt value. Check for leaks and smooth movement before buying complete dampers, and preserve the rack boots when servicing the front end.[1] Exact numbered factory assembly manual (opens in a new tab)[2] Factory design history and exact reissue context (opens in a new tab)
Option suppliers
OEM parts
Drivetrain
1015T Pinion Gear
Gear Bag
Bevel Gear Bag
Rear Drive Shaft
Front Drive Shaft
Gearbox Joint
1150 Ball Bearing
Steering
1Steering Boot, Boot Stopper
Electronics
2Motor Plate
GT-Tuned Motor (25T)
Wheels & tires
4Wheel (Front x2, Rear x2)
Front Tire
Rear Tire
Wheel Axle (BB11 x2)
Chassis & body
6Bumper Stay
Body Stay
Chassis
Sub Chassis
Body, Fender (L, R)
Body Mount
Hardware & seals
293x12mm Screw Pin
2x6mm Screw (BB1 x2)
3x10mm Screw (BC1 x10)
3x27mm Screw (BA2x10)
3mm Lock Nut (BB6 x10)
3x10mm Tapping Screw (Black) (BC3 x10)
2.6x10mm Binding Screw (BC2 x5)
4x6mm Pipe (BD14 x2), 3x15mm Screw (BD1 x2)
Unclassified
50C Parts
T Parts
X Parts
Y Parts
Upright
Instructions
Antenna Holder
4x22mm Tube
102 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Assembly diagrams 7 views
About these specs
Supplied brushed-motor Kv is unpublished.
Read moreShow less
- The ESC and running battery are purchased separately for this numbered kit.
- Check the chosen controller for its own battery and motor ratings. 13T and 15T installations are both documented; there is no single selected default pinion.
Sources
2 source links for this model.
Read moreShow less
- Manuals and parts lists.
- Vehicle product and specification pages.
Links open in a new tab.
Maker documents
1- The Bigwig (2017) assembly manual (Tamiya PDF) (opens in a new tab)Supports 9 specifications · Background 1parts list Exact numbered edition; original printed part-code format retained.Used forMain specsMotor shaftSizeBattery fitWheel hexFluidsElectronicsServiceDrivetrainBackgroundBackground 1
This vehicle
1- Factory design history and reissue context (opens in a new tab)Supports 5 specifications · Background 2Tamiya JapanUsed forMain specsWeightDrivetrainWheels & tiresSuspensionBackgroundBackground 2
