Kyosho Ultima SC6

Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.

Gearing parts

Tooth counts are the ones in the specifications above. Pitch is given as metric module (Mod 1, Mod 0.8) or diametral pitch (32P, 48P). They are different standards and are not interchangeable, even where the numbers look close. Bore is the pinion’s hole, listed separately from the motor shaft. Linked part numbers go to the maker's or official distributor's page for that part.

How these numbers were settled

Electric 1/10 2WD short course kit.

• Kyosho's Technical Data gives 'Gear Ratio 2.6:1' and the required list names the pinion, motor, ESC, tires and wheels, so the pinion, KV and cell rating do not apply and the tire size is left blank.
• The spare-parts list gives a 48 pitch 80T spur (UB050-80).

Sources

• 30070brc.kyosho.com (opens in a new tab)
• ub050-80rc.kyosho.com (opens in a new tab)
• 1rc.kyosho.com (opens in a new tab)

Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.

More from Kyosho

• Ultima Pro
• Ultima RB7
• Ultima RB7.5
• Ultima RB7SS
• USA-1 VE Brushless
• V-ONE R4 Evo.3
• Fazer Mk2 FZ02
• Fazer Mk2 FZ02-D (Drift)