VehiclesTamiya CC-02
Tamiya CC-02 Chassis
1/10 scale · 4WD crawler chassis · sold as kits
Tamiya's CC-02 is a 1/10 four-wheel-drive ladder-frame chassis with rigid axles front and rear, sold as kits under scale off-road bodies such as the Toyota Land Cruiser 300 and the Ford Baja Bronco.
Every kit on it shares the 83T spur and a 3.34:1 stage through the gearbox, transfer case and axles, and the frame is built to 242 mm, 252 mm or 267 mm depending on the body. That long reduction suits slow crawling over rocks. The pinion, motor and tires come with each kit rather than with the chassis, so enter yours in the gearing tool to see the final drive and crawl speed for the kit you have.
- Transmission & axle
- 3.34:1
- Spur
- 83T
- Wheelbase
- 242 / 252 / 267mm
- Introduced
- 2019
The pinion, motor and tires come with each kit: enter yours in the gearing tool.

Kits on this chassis Built on the CC-02
Each kit adds its own body, tires, pinion and motor. The chassis figures below apply to all of them.
| Kit | Part no. | Maker page |
|---|---|---|
| 58675 | tamiya.comPage (opens in a new tab) | |
| 58736 | tamiya.comPage (opens in a new tab) | |
| 58715 | tamiya.comPage (opens in a new tab) | |
| 58688 | tamiya.comPage (opens in a new tab) | |
| 58705 | tamiya.comPage (opens in a new tab) | |
| 58700 | tamiya.comPage (opens in a new tab) | |
| 58692 | tamiya.comPage (opens in a new tab) |
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Crawler | |
| Drive | 4WD | |
| Build | Kit | |
| Scale | 1/10 | |
| Drivetrain | ||
| ||
| Pinion | With each kit | |
| Spur | 83TStock | Stock |
| Transmission & axle | 3.34:1Derived | Derived |
| Final drive | With each kit | |
| Wheels & tires | ||
| ||
| Tire diameter | With each kit | |
| Power | ||
| ||
| Motor | With each kit | |
| Battery | With each kit | |
| Size & weight | ||
| ||
| Wheelbase | 242 or 252 or 267mm, 3 settingsStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how.
- With each kit means each kit on this chassis brings its own, so enter yours in the gearing tool.
How these numbers were settled
Every CC-02 kit shares the 83T spur and the gearbox, transfer case and axle stages after it.
- Tamiya prints the complete ratio on each kit, 'Gear ratio = 17.33:1 (using kit-standard 16T pinion)' on the G 500, Unimog, Defender 90, Bronco 2021, Land Cruiser 40, Land Cruiser 300 and Baja Bronco pages, so the ratio after the spur is worked out: 17.33 x 16 / 83 = 3.341.
- The 83T spur (MA18) is named in the G 500 manual's parts diagram.
- Tamiya says gear swaps and nine separately sold AV pinions give twenty ratios from 11.09:1 to 29.28:1; the tall end, 11.09:1, matches the same stage on a 25T pinion, while the low end needs the swapped gears.
- The chassis is built to three wheelbases: 242mm (Defender 90, Unimog, Baja Bronco), 252mm (Land Cruiser 40, Bronco 2021) and 267mm (G 500, Land Cruiser 300).
- The pinion, motor and tires come with each kit, so they are not part of the chassis figures: enter yours in the gearing tool.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
- Mercedes-Benz G 500 (CC-02) instruction manual (Tamiya PDF) (opens in a new tab)Spur MA18, parts diagram p. 30tamiya.comUsed forMain specs
Parts and electronics
- Products 58675 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58675 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58736 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58715 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58705 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58700 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58688 (opens in a new tab)tamiya.comUsed forMain specs
- Products 58692 (opens in a new tab)tamiya.comUsed forMain specs
- CC 02 parts catalog (PDF) (opens in a new tab)tamiya.comUsed forMain specs
