VehiclesTamiya BB-02
Tamiya BB-02 Chassis
1/9 scale · 2WD buggy chassis · sold as kits
Specs- Wheelbase
- 283mm
The pinion, motor and tires come with each kit: enter yours in the gearing tool.

Kits on this chassis Built on the BB-02
Each kit adds its own body, tires, pinion and motor. The chassis figures below apply to all of them.
Read moreShow less
| Kit | Part no. | Maker page |
|---|---|---|
| 58757 | tamiya.comPage (opens in a new tab) |
Background
The BB-02 is a rear-wheel-drive buggy chassis represented by the Volkswagen Dune Beetle Cross assembly kit. Its styling follows Beetles used in off-road racing on the U.S. West Coast, with a roll cage, wheel housings and an exposed rear engine area.1 The chassis combines a rear motor with a lengthwise battery. Builders can select double trailing arms or double wishbones at the front, while the rear uses trailing arms.
Read moreShow less
A sealed gearbox contains a ball differential.1
Specifications
Last modified
14 specifications across 5 groups, covering stock setup, dimensions and components.
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Buggy | |
| Drive | 2WD | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/9 | |
| Drivetrain | ||
| ||
| Pinion | With each kit | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | With each kit | |
| Differentials | BallrearStock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | With each kit | |
| Power | ||
| ||
| Motor | With each kit | |
| Battery | With each kit | |
| Size & weight | ||
| ||
| Wheelbase | 283 mm11.1 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
- With each kit means each kit on this chassis brings its own, so enter yours in the gearing tool.
Drivetrain5
BB-01 SLIPPER CLUTCH SET
33T STEEL IDLER GEAR
48 PITCH SPUR GEAR (86T)
TA06 STEEL GEAR DIFFERENTIAL UNIT (REAR)
Suspension1
BB-01 D PARTS (SUSPENSION ARMS) (2PCS.)
Steering1
BB-01 ALUMINUM STEERING BRIDGE
- Requires: Compatible with the double wishbone suspension setup.
Wheels & tires2
BBX CHROME PLATED WHEELS (26mm WIDTH, OFFSET +2mm) 4PCS.
CLAMP TYPE ALUMINUM WHEEL HUB (5mm THICK)
Chassis & body1
63mm SWING SHAFTS
Hardware & seals1
TD4 DIFFERENTIAL NUT & SCREW SET
Unclassified7
BB-01 ALUMINUM FRONT UPRIGHTS (2PCS.)
BB-01 ALUMINUM DAMPER STAYS (FRONT)
- Requires: Compatible with the double wishbone suspension setup.
BB-01 FRONT UPRIGHTS (2PCS.)
TRF501X DAMPER HARD TITANIUM COATED PISTON ROD (FRONT/2PCS.)
TRF501X DAMPER HARD TITANIUM COATED PISTON ROD (REAR/2PCS.)
BUGGY BIG BORE AERATION DAMPER (FRONT/2PCS.)
BUGGY BIG BORE AERATION DAMPER (REAR/2PCS.)
18 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Rear-wheel-drive buggy chassis with a rear-mounted motor layout, ball differential and a choice of front double-trailing-arm or double-wishbone suspension. Volkswagen Dune Beetle Cross 58757 is the first recorded kit.
Sources
1 source link for this model.
Individual part and electronics specifications.
Read moreShow less
- Individual part and electronics specifications.
Links open in a new tab.
Parts and electronics
1- BB-02 Volkswagen Dune Beetle Cross (opens in a new tab)Supports 3 specifications · Background 1TamiyaUsed forMain specsSizeDrivetrainBackground 1
