VehiclesSchumacher Cougar LD3D (Dirt Spec)
Schumacher Cougar LD3D (Dirt Spec) Chassis
1/10 scale · 2WD buggy chassis kit · K209
Schumacher's Cougar LD3D (Dirt Spec) is a two-wheel-drive 1/10 buggy kit with a layback gearbox, sold without motor or electronics.
It comes with an 80T spur, and the transmission reduces 2.53:1 after it, so the pinion you choose sets the overall ratio. The Dirt kit runs a ball diff instead of the gear diff and measures 395 mm long, with a wheelbase of 275 to 285 mm. Start with a mild pinion on a loose dirt track, and set the ball diff so it never slips under power.
- Transmission & axle
- 2.53:1
- Spur
- 80T
- Wheelbase
- 275 / 285mm
- Introduced
- 2023
Sold without a motor, so there is no stock KV: compare gearing by rollout.

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Buggy | |
| Drive | 2WD | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | K209 | |
| Drivetrain | ||
| ||
| Pinion | Not applicable | |
| Spur | 80TStock | Stock |
| Transmission & axle | 2.53:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | Not applicable | |
| Motor shaft | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
| Size & weight | ||
| ||
| Length | 395 mm15.6 inStock | Stock |
| Width | 245 mm9.6 inStock | Stock |
| Wheelbase | 275 or 285mm, 2 settingsStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
Other versions of this chassis
How these numbers were settled
2WD race kit, Dirt spec, with a rear layback gearbox that moves the motor 6mm rearward, a smaller idler gear and the ball diff in place of the gear diff.
- The product page lists an 80T spur.
- The LD3 manual covers the Mod, Stock and Dirt kits and prints one gear ratio, 2.53:1, above a chart that reconciles with it (the 80T spur and a 25T pinion give 8.11); it prints no separate figure for the layback gearbox, whose own build step only changes the idler.
- The manual states the pinion is not included, and motor, speed controller and tyres are on the product page's list of items to buy, so the tyre size is left blank.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
- Instruction manual, all LD3 kits (Schumacher PDF) (opens in a new tab)Gear ratio chart p. 29; LD3D gearbox step p. 12racing-cars.comUsed forMain specs
- Exploded diagram (Schumacher PDF) (opens in a new tab)racing-cars.com
This vehicle
- Schumacher Cougar LD3D (Dirt Spec) product page (opens in a new tab)racing-cars.comUsed forMain specsSize
Parts and electronics
- New schumacher LD3 competition 2WD road buggy (opens in a new tab)liverc.comUsed forMain specs
