VehiclesSchumacher Cougar 2 Works Classic

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not applicable | |
| Spur | 95TStock | Stock |
| Transmission & axle | 2.43:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Motor shaft | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | K216 | |
| Scale | 1/10 | |
| Class | Buggy | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
How these numbers were settled
Re-release of the classic 2WD buggy with the Pro transmission.
- The manual prints the internal ratio as 2.428:1, its spares list carries the 95T slipper spur (U8984) and its gear chart starts from the 95T spur (95/17 gives 13.58).
- The kit ships with Schumacher Mini Spike and 2 Row Stud tyres on 2in Aerodisc wheels, but no tyre diameter is published, so it is left blank.
- Motor and pinion are on the manual's list of items to buy.
Documents
Sources
- Manual (PDF)racing-cars.com (opens in a new tab)
- cougar-2-works-classic-kit-…racing-cars.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.
