VehiclesRlaarlo Storm Breaker SBK10 Carbon Fiber RTR
Rlaarlo Storm Breaker SBK10 Carbon Fiber RTR
1/10 scale · buggy · SBK10-B-C
SpecsRlaarlo's Storm Breaker SBK10 Carbon Fiber RTR is a four-wheel-drive 1/10 buggy, sold ready to run with a 3650-2650KV brushless motor and a 60A brushless ESC with a cooling fan.
Its 65T spur feeds a differential stage of 3.09, so the final drive is 65 divided by the pinion, times 3.09. Rlaarlo prints the fitted pinion only as a range, so count the teeth on yours before trusting a speed figure. It rolls on 83 mm tires, measures 400 mm long on a 275 mm wheelbase and is rated for 3S.
- Tire
- 83mm

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Buggy | |
| Drive | 4WD | |
| Power | Brushless | |
| Build | Ready to run | |
| Scale | 1/10 | |
| Part number | SBK10-B-C | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | 65TStock | Stock |
| Transmission & axle | 3.09:1Derived | Derived |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | 83mmStock | Stock |
| Power | ||
| ||
| Motor | 2650KVStock | Stock |
| Battery | Up to 3SLiPoStock | Stock |
| Stock motor | 3650-2650KV Brushless MotorStock | Stock |
| Stock ESC | 60A Independent Brushless ESC with Cooling FanStock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Length | 400 mm15.7 inStock | Stock |
| Width | 250 mm9.8 inStock | Stock |
| Height | 133 mm5.2 inStock | Stock |
| Wheelbase | 275 mm10.8 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how.
- Not published means it exists but no source we could find prints it.
How these numbers were settled
Rlaarlo's manual (PDF p. 16) prints the carbon version's motor pinion only as a 24-27T range in English and in Chinese, and the product page lists a 27T motor gear in the box, so the pinion and final drive are left blank.
- The English spur text reads 48-65T, while the Chinese text beside it and Rlaarlo's 65T spur part, which lists the SBK10, both give 65T.
- The differential stage pairs an 11T gear with a 34T ring gear, which is 3.09:1 after the spur, worked out from the printed tooth counts.
- The tires are 83mm in diameter, 32mm wide at the front and 39mm wide at the rear.
- The motor is a 3650 2650KV on a 60A ESC that supports 2S to 3S, and the pack in the box is a 3S 2200mAh LiPo.
- Rlaarlo prints 60 to 80 km/h in the manual and 50 to 80 km/h on the product page, which are ranges and not a single claim, so none is shown.
- The drive is four-wheel drive through a central differential.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
1- Storm Breaker SBK10 user manual (Rlaarlo PDF) (opens in a new tab)Supports 3 specificationsInformation parameter table, PDF p. 16Used forMain specsSizeElectronics
Parts and electronics
2- Rlaarlo carbon fiber brushless 4WD buggy SBK10 (opens in a new tab)Supports 3 specificationsUsed forMain specsSizeElectronics
- 65T spur gear cnc for RC parts (opens in a new tab)Supports 1 specificationUsed forMain specs
More from Rlaarlo
All Rlaarlo vehicles
Dragon Scale Knight (DSK) Kit1/8 · DSK08-KIT
Dragon Scale Knight (DSK) Roller1/8 · DSK08-Roller-R
Dragon Scale Knight (DSK) RTR1/8 · DSK08-RTR-R
Storm Breaker SBK10 Metal RTR1/10 · SBK10-O-A
X12S Brushless RTR1/12 · X12S-R
AK-787 Carbon Fiber Brushless RTR1/10 · AK-787O-C
AK-787 Metal Brushless RTR1/10 · AK-787B-A- All Rlaarlo vehicles
