VehiclesRlaarlo Dragon Scale Knight (DSK) RTR

Rlaarlo

Rlaarlo Dragon Scale Knight (DSK) RTR

1/8 scale · buggy · DSK08-RTR-R

Top speed
65mphcalculated
Final drive
9.70:1
Tire
118mm
Rlaarlo Dragon Scale Knight (DSK) RTR
Photo: Rlaarlo

Specifications

Last modified

SpecValueBasis
Drivetrain
Pinion17TStockStock
Spur46TStockStock
Transmission & axle3.58:1DerivedDerived
Spur ÷ pinion2.706:1CalculatedCalculated
Final drive9.70:1StockStock
Wheels & tires
Tire diameter118mmStockStock
Rollout38.2mm per motor turnCalculatedCalculated
Power
Motor2050KVStockStock
BatteryUp to 6SLiPoStockStock
Performance
Theoretical top speed64.8mph on 6SCalculatedCalculated
Motor speed45,510rpm, no loadCalculatedCalculated
Advertised top speed49mphMaker's claimMaker's claim
Vehicle
Part numberDSK08-RTR-R
Scale1/8
ClassBuggy

Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how. The top speed is kinematic: an ideal no-load RPM with no slip and no loss under load, so a real car is slower. The maker advertises 49 mph, which is their own claim on their own conditions.

How these numbers were settled

Rlaarlo’s spec table gives a 17T motor pinion, a 46T spur, an overall drive ratio of 9.7 and a 118mm tire on the RTR.

Sources

Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.

More from Rlaarlo