VehiclesMugen Seiki MBX8 ECO
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| Class | Buggy | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/8 | |
| Part number | MUGE2022 | |
| Drivetrain | ||
| Pinion | Not published | |
| Spur | 46TStock | Stock |
| Transmission & axle | 3.38:1Derived | Derived |
| Final drive | Not published | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Introduced in 2018, this electric buggy kit pairs a 46 tooth HTD spur gear with a 13 tooth straight cut bevel gear and a 44 tooth conical gear, a ratio of about 3.4 to 1 after the spur.
- It needs a brushless motor, speed control, battery, radio, tires and wheels to run.
- No source publishes a stock motor pinion size, so the final drive is left blank.
Sources
- new-mugen-seiki-mbx8-eco-18…liverc.com (opens in a new tab)
- mugen-mbx8-eco-off-road-bug…campbelltownhobbies.com.au (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.