Vehicles1RC Racing 1/7 Sprint Car Conversion Kit
1RC Racing 1/7 Sprint Car Conversion Kit
1/7 scale · oval · 1RC1028
Reference priceUSD 249.99
- Original listing
- USD 249.99Price source (opens in a new tab)
Reference prices; current prices may differ.

- Scale
- 1/7
- Drive
- 2WD
- Max LiPo
- -
- Power
- electric
Background
This conversion turns a Traxxas Slash 1/10 two-wheel-drive donor vehicle into a 1/7 sprint car. The package supplies its own molded composite rear-motor chassis rather than relying on the donor's chassis plate. A cage, driver, tail tank, metal bumpers and polycarbonate wings establish the sprint-car body layout. Integrated down-travel adjustment and an eight-degree left-rear hub provide oval-oriented setup features.
Read moreShow less
The donor vehicle and tires are separate purchases, so the finished car's electronics and gearing depend on the chosen build. 1RC Racing (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Oval | |
| Drive | 2WD | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/7 | |
| Part number | 1RC1028 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Battery retention | Bottom-loading chassis battery trayBattery changes do not require body/cage removal. Pack-size limits are not stated.Stock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
| Size & weight | ||
| ||
| Length | 538 mm21.2 inStock | Stock |
| Wheelbase | 313 mm12.3 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Plan the 1/7 Sprint conversion around a complete donor drivetrain and electronics package. The factory guide transfers the front and rear suspension and transmission onto the Sprint chassis, while wheels and tires are selected separately. Its 2S/3300KV gearing example is a starting point for that combination; keep the actual motor, tire and track conditions with your gearing notes.[1] 1/7 Sprint Car Conversion Kit factory setup manual (opens in a new tab)
Set the front and rear droop screws flush with the chassis top as the illustrated assembly baseline, then record subsequent track adjustments separately. Preserve the specified left-rear hub and the donor fasteners called out for the shock-tower/chassis-brace connection. Inspect full suspension and steering travel before the first run on a smooth track.[1] 1/7 Sprint Car Conversion Kit factory setup manual (opens in a new tab)
Read moreRead less about build and setup for 1/7 Sprint Car Conversion Kit
Mount the controller with its switch accessible through the cage arrangement shown in the manual. Keep the cage, body-panel, nerf-bar and wing hardware with their own assembly steps, then check the battery and wiring clearances before closing the car. That makes routine setup changes and battery access easier while retaining the intended layout.[1] 1/7 Sprint Car Conversion Kit factory setup manual (opens in a new tab)
OEM parts
Wheels & tires
8Standard Front Tires & Chrome Wheels, 1/7 Sprint Car (2)
Soft Front Tires & Black Wheels, 1/7 Sprint Car (2)
Soft Front Tires & Chrome Wheels, 1/7 Sprint Car (2)
Standard Rear Tires & Black Wheels, 1/7 Sprint Car (2)
Standard Rear Tires & Chrome Wheels, 1/7 Sprint Car (2)
Soft Rear Tires & Black Wheels, 1/7 Sprint Car (2)
Soft Rear Tires & Chrome Wheels, 1/7 Sprint Car (2)
Chassis & body
5Chassis Plate, 1/7 Sprint Car
Bumper & Nerf Bar Set, 1/7 Sprint Car
Top Wing Set, Clear, 1/7 Sprint Car
Front Wing Mount Plates, 1/7 Sprint Car
Top Wing Mount, 1/7 Sprint Car
Unclassified
5Cage Set, 1/7 Sprint Car
Left Rear Aluminum Hub Set, 8 Degree, 7th Sprint Car
- Configuration: Designed specifically for the left-rear position; built-in 8 degree toe-in.
- Service replacement: Replacement for the left rear hub included with the 1RC Racing 1/7 Sprint Car Conversion Kit.
Hood, Tail Tank & Driver, Clear, 1/7 Sprint Car
Sticker Sheet Pack, 1/7 Sprint Car
Foam Car Stand, Black, 1/7th Sprint Car
18 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Conversion requires a Traxxas Slash 1/10 2WD donor vehicle and separately purchased tires.
Sources
3 source links for this model.
Read moreShow less
- Manuals and setup sheets.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
2- 1/7 sprint conversion instruction manual (PDF) (opens in a new tab)Supporting reference
- 1/7 Sprint Car setup sheet (PDF; blank form not yet verified) (opens in a new tab)Supporting reference
Parts and electronics
1- 1/7 Sprint Car Conversion Kit (opens in a new tab)Supports 3 specifications · Background 11RC RacingUsed forMain specsSizePowerBackgroundBackground 1
