Vehicles1RC Racing 1/18 Eastern Dirt Modified EDM 3.0
1RC Racing 1/18 Eastern Dirt Modified EDM 3.0
1/18 scale · oval · 1RC1117
Reference priceUSD 209.99
- Original listing
- USD 209.99Price source (opens in a new tab)
Reference prices; current prices may differ.
Also sold as the 1RC Racing 1RC1116 (black)

- Scale
- 1/18
- Drive
- -
- Max LiPo
- -
- Motor Kv
- 8,700
Background
The EDM 3.0 represents an Eastern Dirt Modified with an open-wheel body, front and rear straight axles and metal nerf bars. Its rear axle uses radius rods, a Panhard bar and adjustable friction shocks. Version 3.0 updates the chassis side rails, front bumper mount, front axle and metal-gear steering servo. A supplied brushless motor, radio, steering servo, rechargeable NiMH battery and charger complete the ready-to-run package. Paint is required for the clear body. 1RC Racing (opens in a new tab)
Read moreShow less
A solid rear axle carries the rear wheels together, with the suspension locating that axle as an assembly. Check link and driveshaft clearance through the suspension travel when changing axle position or ride height. Source details (opens in a new tab)
This package reproduces an oval-racing body and suspension layout at small scale. The tyre specification belongs to its dirt or asphalt class, so matching the surface and class rules comes before changing power equipment. Keep the exact revision beside the parts list when comparing similarly named 1RC models. Source details (opens in a new tab)
The rear suspension uses a solid axle with scale-style locating hardware. Those axle and link settings work together, so record the baseline rather than changing several mounting positions at once. A tyre or body conversion does not by itself establish that every suspension component is shared. Source details (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Oval | |
| Power | Brushless | |
| Build | Ready to run | |
| Scale | 1/18 | |
| Part number | 1RC1117 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Power | ||
| ||
| Motor | 8700KVStock | Stock |
| Battery | Not published | |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Weight | 0.28 kg (0.6 lb)with batteryStock | Stock |
| Length | 248 mm9.8 inStock | Stock |
| Height | 87 mm3.4 inStock | Stock |
| Wheelbase | 153 mm6 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Start EDM 3.0 setup by identifying whether the car needs help entering the corner or leaving it. For an entry push, the factory sheet offers more steering dual rate or less right-front spring tension. For an overly sharp entry, it reverses those choices. Dual rate limits maximum steering travel, so check that setting and free linkage movement before replacing the servo.[1] 1/18 Eastern Dirt Modified EDM 3.0 factory setup manual (opens in a new tab)
On exit, more right-rear spring tension is the manual's starting change for too little steering; less tension is its starting change for too much. Compare the car on the same surface after each adjustment. A slowdown during a run deserves a battery, temperature and drivetrain-binding check before a power upgrade. These directions apply to the EDM 3.0's factory setup and do not establish the same balance on an earlier EDM or a different oval chassis.[1] 1/18 Eastern Dirt Modified EDM 3.0 factory setup manual (opens in a new tab)
OEM parts
Drivetrain
1Suspension
3Shock Assembly Tool 2.0, 1/18th & 1/24th
Threaded Alum Shock Body Set, Blue, 18th Scale (4)
Threaded Alum Shock Body Set, Silver, 18th Scale (4)
Steering
1Servo Arm, Solid, 21T, 1/18 Mid, Spr
- Requires: Fits 1RC7017 servo and a 21T servo interface; does not fit the standard servo supplied with the cars.
Electronics
110000Kv Brushless Motor & 10T Pinion, 1/18 Spr, EDM, LM
- Configuration: Maker states motors run with LiPo batteries are not covered by its motor warranty. The option listing does not establish installed ESC, battery or thermal suitability.
- Requires: Run this motor with the motor heat sink. The maker permits only the stock battery supplied with the car and excludes LiPo use from motor warranty.
Wheels & tires
4FR/RR Soft Tires & Wheels, Black, 1/18 EDM (4)
FR/RR Soft Tires & Wheels, Silver Chrome, 1/18 EDM (4)
FR/RR Tires & Wheels, Silver Chrome, 1/18 EDM (4)
Flanged Front Wheel Bearing Set, 1/18
- Requires: On Midget, Sprint Car and EDM, install the Nyloc nut backwards as instructed to secure it fully to the axle.
Chassis & body
1Body Hardware, Plastics, 1/18 Cars
Hardware & seals
1O-Rings, Clear, Shocks, 1/18 Mid, Spr, EDM, LM (10)
Unclassified
12Foam Car Stand, Black, Mid, Spr, EDM
Short Spring Kit, 1/18 Mid, Spr, EDM, LM (16)
Pit Tray, Gray
0.9mm Hex Driver, Mini Handle, Black
Adjustable Radius Rod, Front Upper, 1/18 Mid, Spr, EDM
Adjustable Front Tie Rod, 1/18 Mid, Spr, EDM
Rear End, Black, 1/18 Mid, Spr, EDM, LM
4.0mm Hex Socket Driver, Mini Handle, Black
24 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Sources
3 source links for this model.
Read moreShow less
- Manuals.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
1- EDM 3.0 instruction manual (1RC Racing PDF) (opens in a new tab)Supports 1 specificationUsed forMain specs
Parts and electronics
2- 1/18 Eastern Dirt Modified EDM 3.0 (opens in a new tab)Supports 3 specifications · Background 11RC RacingUsed forMain specsWeightSizeBackgroundBackground 1
- Manuals videos (opens in a new tab)Supports 1 specificationUsed forMain specs
