Vehicles1RC Racing 1/18 Asphalt Late Model
1RC Racing 1/18 Asphalt Late Model
1/18 scale · oval · 1RC1142
Reference priceUSD 209.99
- Original listing
- USD 209.99Price source (opens in a new tab)
Reference prices; current prices may differ.
Also sold as the 1RC Racing 1RC1140 (red) and the 1RC Racing 1RC1141 (black)

- Scale
- 1/18
- Drive
- -
- Max LiPo
- -
- Motor Kv
- 8,700
Background
The Asphalt Late Model uses independent front suspension and a solid rear axle with radius rods, a Panhard bar and adjustable friction shocks. Its close-wheel body and Hoosier-pattern tires represent a pavement oval car. The manufacturer also offers an Asphalt Truck conversion for this model. A supplied brushless motor, radio, steering servo, rechargeable NiMH battery and charger complete the ready-to-run package. Paint is required for the clear body. 1RC Racing (opens in a new tab)
Read moreShow less
Independent front suspension and a solid rear axle give the model different front and rear service assemblies. Identify the axle end and exact suspension version before copying a setup from another body in the range. Source details (opens in a new tab)
A solid rear axle carries the rear wheels together, with the suspension locating that axle as an assembly. Check link and driveshaft clearance through the suspension travel when changing axle position or ride height. Source details (opens in a new tab)
This package reproduces an oval-racing body and suspension layout at small scale. The tyre specification belongs to its dirt or asphalt class, so matching the surface and class rules comes before changing power equipment. Keep the exact revision beside the parts list when comparing similarly named 1RC models. Source details (opens in a new tab)
The rear suspension uses a solid axle with scale-style locating hardware. Those axle and link settings work together, so record the baseline rather than changing several mounting positions at once. A tyre or body conversion does not by itself establish that every suspension component is shared. Source details (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Oval | |
| Power | Brushless | |
| Build | Ready to run | |
| Scale | 1/18 | |
| Part number | 1RC1142 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Power | ||
| ||
| Motor | 8700KVStock | Stock |
| Battery | Not published | |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Weight | 0.31 kg (0.7 lb)with batteryStock | Stock |
| Length | 292 mm11.5 inStock | Stock |
| Height | 73 mm2.9 inStock | Stock |
| Wheelbase | 147 mm5.8 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
The 1/18 Asphalt Late Model's narrow tires make a smooth track and a controlled steering response worth sorting out first. If the car reacts too sharply on entry, reduce steering dual rate or add right-front spring tension. If it pushes wide instead, the factory sheet suggests more dual rate or less right-front tension. Keep this 1/18 guide separate from the smaller 1/24 car's different tuning directions.[1] 1/18 Asphalt Late Model factory setup manual (opens in a new tab)
For an exit push, the manual suggests more right-rear spring tension; for too much exit steering, less right-rear tension. Change one setting at a time and compare the same corner. If the steering servo can be heard but the wheels do not move, inspect dual rate, the servo saver and the linkage before replacing electronics. These are factory setup and diagnostic choices, with no claim that an optional part is required to race the car.[1] 1/18 Asphalt Late Model factory setup manual (opens in a new tab)
OEM parts
Drivetrain
1Suspension
3Shock Assembly Tool 2.0, 1/18th & 1/24th
Threaded Alum Shock Body Set, Blue, 18th Scale (4)
Threaded Alum Shock Body Set, Silver, 18th Scale (4)
Steering
2Servo Arm, Solid, 21T, 1/18 LM
- Requires: Fits 1RC7017 servo and a 21T servo interface; does not fit the standard servo supplied with the cars.
Servo/ESC Extension Wire, 100mm, 1/18 Scale
Electronics
110000Kv Brushless Motor & 10T Pinion, 1/18 Spr, EDM, LM
- Configuration: Maker states motors run with LiPo batteries are not covered by its motor warranty. The option listing does not establish installed ESC, battery or thermal suitability.
- Requires: Run this motor with the motor heat sink. The maker permits only the stock battery supplied with the car and excludes LiPo use from motor warranty.
Wheels & tires
3FR/RR Soft Tires & Chrome Wheels, 1/18 Asphalt LM (4)
FR/RR Soft Tires & Black Wheels, 1/18 Asphalt LM (4)
FR/RR Tires & Chrome Wheels, 1/18 Asphalt LM (4)
Chassis & body
2Body Mount Adapters, Front, 1/18 Asphalt Late Model 2.0
Body & Driver, Clear, 1/18 Asphalt Late Model 2.0
- Requires: Requires the 1RC2072 Asphalt Truck bumper for the Asphalt Late Model 2.0 body conversion.
Hardware & seals
1O-Rings, Shocks, 1/18 Mid, Spr, EDM, LM (10)
Unclassified
12Radius Rods, Black, 1/18 LM
Foam Car Stand, Black, LM
Adjustable Front Tie Rod, 1/18 LM
Short Spring Kit, 1/18 Mid, Spr, EDM, LM (16)
Pit Tray, Gray
1/18 Asphalt Truck, Conversion Kit
- Requires: Conversion only. Requires a 1/18 Asphalt Late Model donor: 1RC1140, 1RC1141 or 1RC1142.
0.9mm Hex Driver, Mini Handle, Black
Rear End, Black, 1/18 Mid, Spr, EDM, LM
25 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Sources
3 source links for this model.
Read moreShow less
- Manuals.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
1- Asphalt Late Model instruction manual (1RC Racing PDF) (opens in a new tab)Supports 1 specificationUsed forMain specs
Parts and electronics
2- 1/18 Asphalt Late Model (opens in a new tab)Supports 3 specifications · Background 11RC RacingUsed forMain specsWeightSizeBackgroundBackground 1
- Manuals videos (opens in a new tab)Supports 1 specificationUsed forMain specs
