Vehicles1RC Racing 1/18 Dirt Late Model 2.0
1RC Racing 1/18 Dirt Late Model 2.0
1/18 scale · oval · 1RC1087
Reference priceUSD 219.99
- Original listing
- USD 219.99Price source (opens in a new tab)
Reference prices; current prices may differ.
Also sold as the 1RC Racing 1RC1086 (black) and the 1RC Racing 1RC1088 (white)

- Scale
- 1/18
- Drive
- -
- Max LiPo
- -
- Motor Kv
- 8,700
Background
The Dirt Late Model 2.0 combines independent front suspension with a solid rear axle located by radius rods and a Panhard bar. The revision adds a plastic front bumper and flanged front wheel bearings. Hoosier-pattern tires on chrome wheels sit beneath the close-wheel body, and the clear version requires painting. A supplied brushless motor, radio, steering servo, rechargeable NiMH battery and charger complete the ready-to-run package. Paint is required for the clear body. 1RC Racing (opens in a new tab)
Read moreShow less
Independent front suspension and a solid rear axle give the model different front and rear service assemblies. Identify the axle end and exact suspension version before copying a setup from another body in the range. Source details (opens in a new tab)
A solid rear axle carries the rear wheels together, with the suspension locating that axle as an assembly. Check link and driveshaft clearance through the suspension travel when changing axle position or ride height. Source details (opens in a new tab)
The axle suspension uses four links to locate it beneath the chassis. Link length and mounting position set axle location, so preserve their front and rear positions when rebuilding the suspension or changing the body installation. Source details (opens in a new tab)
This package reproduces an oval-racing body and suspension layout at small scale. The tyre specification belongs to its dirt or asphalt class, so matching the surface and class rules comes before changing power equipment. Keep the exact revision beside the parts list when comparing similarly named 1RC models. Source details (opens in a new tab)
The rear suspension uses a solid axle with scale-style locating hardware. Those axle and link settings work together, so record the baseline rather than changing several mounting positions at once. A tyre or body conversion does not by itself establish that every suspension component is shared. Source details (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Oval | |
| Power | Brushless | |
| Build | Ready to run | |
| Scale | 1/18 | |
| Part number | 1RC1087 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Power | ||
| ||
| Motor | 8700KVStock | Stock |
| Battery | Not published | |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Weight | 0.28 kg (0.6 lb)with batteryStock | Stock |
| Length | 290 mm11.4 inStock | Stock |
| Height | 71 mm2.8 inStock | Stock |
| Wheelbase | 147 mm5.8 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
OEM parts
Drivetrain
1Suspension
3Shock Assembly Tool 2.0, 1/18th & 1/24th
Threaded Alum Shock Body Set, Blue, 18th Scale (4)
Threaded Alum Shock Body Set, Silver, 18th Scale (4)
Steering
2Servo Arm, Solid, 21T, 1/18 LM
- Requires: Fits 1RC7017 servo and a 21T servo interface; does not fit the standard servo supplied with the cars.
Servo/ESC Extension Wire, 100mm, 1/18 Scale
Electronics
110000Kv Brushless Motor & 10T Pinion, 1/18 Spr, EDM, LM
- Configuration: Maker states motors run with LiPo batteries are not covered by its motor warranty. The option listing does not establish installed ESC, battery or thermal suitability.
- Requires: Run this motor with the motor heat sink. The maker permits only the stock battery supplied with the car and excludes LiPo use from motor warranty.
Wheels & tires
4FR/RR Soft Tires & Chrome Wheels, 1/18 LM (4)
FR/RR Soft Tires & Black Wheels, 1/18 LM (4)
FR/RR Tires & Chrome Wheels, 1/18 LM (4)
Flanged Front Wheel Bearing Set, 1/18
- Requires: On Midget, Sprint Car and EDM, install the Nyloc nut backwards as instructed to secure it fully to the axle.
Chassis & body
4Front Bumper & Side Nerf Bar, 1/18 Late Model 3.0
Body Set, Clear, 1/18 Late Model 3.0
- Requires: Requires 1RC2090 front bumper and side nerf bar for the Late Model 3.0 body conversion. Retain the named conversion parts rather than assuming the original bumper is sufficient.
Front Bumper & Side Nerf Bar, 1/18 LM 2.0
Body Hardware, Plastics, 1/18 Cars
Hardware & seals
1O-Rings, Shocks, 1/18 Mid, Spr, EDM, LM (10)
Unclassified
11Radius Rods, Black, 1/18 LM
Foam Car Stand, Black, LM
Adjustable Front Tie Rod, 1/18 LM
Short Spring Kit, 1/18 Mid, Spr, EDM, LM (16)
Pit Tray, Gray
0.9mm Hex Driver, Mini Handle, Black
Rear End, Black, 1/18 Mid, Spr, EDM, LM
4.0mm Hex Socket Driver, Mini Handle, Black
27 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Sources
3 source links for this model.
Read moreShow less
- Setup sheets.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
1- Late Model 2.0 blank setup sheet (1RC Racing PDF) (opens in a new tab)Supports 1 specificationUsed forMain specs
Parts and electronics
2- 1/18 Dirt Late Model 2.0 (opens in a new tab)Supports 3 specifications · Background 11RC RacingUsed forMain specsWeightSizeBackgroundBackground 1
- Setup sheets (opens in a new tab)Supports 1 specificationUsed forMain specs
