Vehicles1RC Racing 1/18 Racer Kit
1RC Racing 1/18 Racer Kit
1/18 scale · oval · 1RC1089
Reference priceUSD 74.99
- Original listing
- USD 74.99Price source (opens in a new tab)
Reference prices; current prices may differ.

- Scale
- 1/18
- Drive
- -
- Max LiPo
- -
- Power
- electric
Background
The Racer Kit is an unassembled starting point for four oval body configurations: Asphalt Late Model, Asphalt Truck, Dirt Street Stock and Dirt Late Model. The builder selects the motor, radio, servo, battery, ESC, body, wheels and tires. Recommended motor choices therefore describe build options rather than supplied stock equipment. The kit includes a servo extension and assembly manual; separate motor choices let the builder select a power system for the intended configuration. 1RC Racing (opens in a new tab)
Read moreShow less
This package reproduces an oval-racing body and suspension layout at small scale. The tyre specification belongs to its dirt or asphalt class, so matching the surface and class rules comes before changing power equipment. Keep the exact revision beside the parts list when comparing similarly named 1RC models. Source details (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Oval | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/18 | |
| Part number | 1RC1089 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Build free suspension into the Racer Kit before chasing a race setup. Seat each shock O-ring in its shaft groove, lubricate it, and check that it stays in place as the shaft enters the body. The manual's 7.3mm assembly measurement runs from the bottom of the shock body to the top of the ball cup, not between the mounting eyes. Match all four shocks at those reference points and avoid tightening the ball cups or mounting screws enough to bind them.[1] 1/18 Racer Kit factory setup manual (opens in a new tab)
Use the 10T-pinion 1RC7003 or 1RC7011 motor specified for this kit's gearbox; the motor is a separate purchase. Install the rear panhard bar before the motor, follow the illustrated motor orientation, and keep the wires straight where they leave the can. Fully seat the axle bearings and tighten both axle-tube screws evenly before closing the transmission.[1] 1/18 Racer Kit factory setup manual (opens in a new tab)
Read moreRead less about build and setup for 1/18 Racer Kit
Centre your chosen servo electrically before fitting its adapter. Start the front suspension with equal caster spacing as illustrated, then check free movement on both sides. Follow the body-specific assembly branches: Dirt Street Stock uses different frame rails, and cage bars and mounts vary between the supported bodies.[1] 1/18 Racer Kit factory setup manual (opens in a new tab)
OEM parts
Drivetrain
4HD Rear Axle & Compound Gear, 1/18 LM
Bearing Set, 1/18 Mid, Spr, EDM (8)
Flanged Bearing Set
Suspension
5Front Suspension Plastics Set, 1/18 LM
Front Suspension Hardware Set, 1/18 LM
Shock Set, 1/18 Mid, Spr, EDM (4)
Shock Plastic Pars, 1/18 Mid, Spr, EDM
Shock Assembly Tool
Steering
4Servo Arm, Solid, 21T, 1/18 LM
Steering Servo, Digital Metal Gear, 18th Scale
Steering Servo, 1/18 LM
Servo/ESC Extension Wire, 100mm, 1/18 Scale
Electronics
68700Kv Brushless Motor & 10T Pinion
Heatsink,Motor, 1/18 Mid, Spr, EDM
10000Kv Brushless Motor & 10T Pinion
Transmitter & Receiver, GT2E
ESC Only, 1/18 Scale
Double Stick Tape, ESC & Rx, 1/18th
Wheels & tires
13Offset Wheel Hexes, 1/18 Mid, Spr, EDM
FR/RR Tires & Black Wheels, 1/18 LM (4)
FR/RR Tires & Chrome Wheels, 1/18 LM (4)
FR/RR Soft Tires & Black Wheels, 1/18 LM (4)
FR/RR Soft Tires & Chrome Wheels, 1/18 LM (4)
FR/RR Tires & Black Wheels, 1/18 Modified (4)
FR/RR Tires & Chrome Wheels, 1/18 Modified (4)
FR/RR Soft Tires & Black Wheels, 1/18 Modified (4)
Chassis & body
7Ft. Bumper & Side Nerf Bar, 1/18 LM 2.0
Ft. Bumper, 1/18 Asphalt Truck
Front Bumper, 1/18 Dirt Street Stock
Body Set Clear, 1/18 Asphalt Late Model
Body Set, Clear, 1/18 LM 2.0
Body & Driver, Clear, 1/18 Asphalt Truck
Body & Driver, Clear, 1/18 Dirt Street Stock
Hardware & seals
2O-Rings, Clear, Shocks, 1/18 LM (10)
Self Threading Screws, M1.6 x 10mm (20)
Unclassified
25Frame, 1/18 LM
Frame Sides Only, 1/18 LM
Engine Parts, 1/18 LM
Frame, 1/18 Modified
Frame Sides Only, 1/18 Modified
Cage Parts, 1/18 Asphalt Truck
Cage Parts, 1/18 Dirt Street Stock
Rear End , 1/18 Mid, Spr, EDM
66 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Motor, servo, battery, radio, ESC, body, wheels and tires are required separately. Recommended motor choices are not stock installed equipment.
Sources
2 source links for this model.
Read moreShow less
- Manuals.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
1- 1/18 Racer Kit assembly manual (PDF) (opens in a new tab)Supporting reference
Parts and electronics
1- 1/18 Racer Kit (opens in a new tab)Supports 1 specification · Background 11RC RacingUsed forMain specsBackgroundBackground 1
