VehiclesTamiya TT-01 Type-E Team Hahn Racing MAN TGS

Tamiya TT-01 Type-E Team Hahn Racing MAN TGS
1/14 scale · 58632
- Final drive
- 8.35:1
- Tire
- 70mm

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 8.35:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 70mmStock | Stock |
| Rollout | 26.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | 58632 | |
| Scale | 1/14 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
The TT-01 Type-E transmission differs from the TT-02, and Tamiya does not print its kit pinion or spur tooth counts, so the pinion, spur and transmission and axle ratio are left blank rather than guessed; they are unknown, not inapplicable.
- Only the published overall ratio, 'Gear Ratio=8.35:1', is recorded.
- Brushed Type 540 motor included, ESC sold separately. 1/14 scale race-truck body on the 1/10 TT-01E chassis; tires are 28/70mm.
- Unassembled kit with no battery; the motor is brushed, so KV and cell count do not apply.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.