VehiclesHPI Racing Venture18 1985 Toyota Hilux SR5
HPI Racing
HPI Racing Venture18 1985 Toyota Hilux SR5
1/18 scale · 160800
- Final drive
- 20.36:1
- Tire
- 60mm
Open in Top Speedsourced
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | 20.36:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 60mmStock | Stock |
| Rollout | 9.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not applicable | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | 160800 | |
| Scale | 1/18 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Brushed Venture18 (#160834 Micro Crawler Motor 55T, 180 size).
- TWO-SPEED: 20.36:1 high gear listed, 81.44:1 low.
- Brushed motor, which carries a turn count rather than a KV rating.
Sources
- 160800hpiracing.com (opens in a new tab)
- stdhpiracing.com (opens in a new tab)
- 160840hpiracing.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.