VehiclesHPI Racing RS4 Sport 3 Drift
HPI Racing
HPI Racing RS4 Sport 3 Drift
1/10 scale · 114356
- Final drive
- 8.53:1
- Tire
- 63mm
Open in Top Speedverified
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 27TStock | Stock |
| Spur | 75TStock | Stock |
| Transmission & axle | 3.07:1Stock | Stock |
| Spur ÷ pinion | 2.778:1Calculated | Calculated |
| Final drive | 8.53:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 63mmEstimated | Estimated |
| Rollout | 23.2mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | Not published | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not published | |
| Vehicle | ||
| Part number | 114356 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not published means it exists but no source we could find prints it.
How these numbers were settled
Same chassis and gearing as the RS4 Sport 3; only body and tires differ (hard T-Drift compound). HPI serves the identical manual for both.
Sources
- 114356hpiracing.com (opens in a new tab)
- 114356hpiracing.com (opens in a new tab)
- Manual (PDF)hpiracing.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.