VehiclesArrma Gorgon 2WD
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 13TStock | Stock |
| Spur | 61TStock | Stock |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| Tire diameter | Not published | |
| Power | ||
| Motor | Not applicable | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | ARA3230 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
Arrma publishes pinion 13T, spur 61T and a brushed 14-turn Mega 550, but no gear ratio of any kind and no tire diameter.
- The kit manual is a bag-by-bag build with no parts list and the transmission arrives pre-assembled, so no internal tooth counts are ever printed; the RTR manual defers gear detail to a Technical Pack that is not published.
- Brushed, so there is no KV.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.