VehiclesAgama N2
Agama N2
1/8 scale · buggy · N2N
Specs- Final drive
- 11.96:1
Engine powered, so there is no motor KV: compare gearing by rollout.

Specifications
Last modified
20 specifications across 6 groups, covering stock setup, dimensions and components.
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Buggy | |
| Drive | 4WD | |
| Power | Nitro | |
| Build | Kit | |
| Scale | 1/8 | |
| Part number | N2N | |
| Drivetrain | ||
| ||
| Pinion | 13TStock | Stock |
| Spur | 47TStock | Stock |
| Transmission & axle | 3.31:1Derived | Derived |
| Final drive | 11.96:1Stock | Stock |
| Diff oil, front | 20KStock | Stock |
| Diff oil, center | 10KStock | Stock |
| Diff oil, rear | 10KStock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Suspension | ||
| ||
| Spring | 6M65875 Black-Greenfront and rearStock | Stock |
| Shock oil, front | 40 wtStock | Stock |
| Shock oil, rear | 50 wtStock | Stock |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
Pinion × spur map
Alternate fitment unverifiedStock 13T pinion / 47T spur Internal ratio 3.31:1 fixed
Read moreShow less
| Pinion | 45T spur | 47T spur | 49T spur |
|---|---|---|---|
| 11T | |||
| 12T | |||
| 13T | |||
| 14T | |||
| 15T | |||
| 16T |
Select a pair to compare wheel travel per motor turn with stock. Other cells are mathematical examples, not verified gears or fits. Check pitch, mesh, clearance and motor temperature before changing parts.
About these specs
Factory N2 manual specifies 13T clutch bell and 47T center spur, with 43T axle ring gears and 13T bevel pinions.
Read moreShow less
- Internal reduction=43/13; total=(47/13)×(43/13)=11.95858.
- Diff oils retain the printed 20,000wt/10,000wt/10,000wt labels using the existing thousands-scale differential shorthand contract; shock oils remain 40wt front and 50wt rear, without conversion.
- Tire dimensions and overall chassis dimensions are unverified.
Sources
3 source links for this model.
Read moreShow less
- Manuals.
- Individual part and electronics specifications.
Links open in a new tab.
Maker documents
1- N2 instruction manual (Agama factory PDF via Trackside Performance) (opens in a new tab)Supports 3 specificationsPDF pp.4-7,10,21,35: kit gearing, oils and factory setupUsed forMain specsFluidsSuspension
Parts and electronics
2- 17 1 (opens in a new tab)Supports 1 specificationUsed forMain specs
- Agama N2 nitro competition buggy kit (opens in a new tab)Supports 1 specificationUsed forMain specs
