VehiclesYokomo Master Speed MS2.1
Yokomo Master Speed MS2.1 Chassis
1/10 scale · touring chassis kit · MSR-021
Yokomo's Master Speed MS2.1 is a 1/10 electric touring car kit, sold with graphite, aluminium or steel chassis plates and without motor, electronics, tires or a pinion.
The 90T spur drives the belts through a 2:1 reduction, so the final drive is 90 divided by your pinion, times 2. Check your class rules on motors and gearing before you choose a pinion, then enter it in the gearing tool to see the speed it gives.
- Transmission & axle
- 2.00:1
- Spur
- 90T
- Introduced
- 2026
Sold without a motor, so there is no stock KV: compare gearing by rollout.

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | MSR-021 | |
| Drivetrain | ||
| ||
| Pinion | Not applicable | |
| Spur | 90TStock | Stock |
| Transmission & axle | 2.00:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | Not applicable | |
| Motor shaft | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
Other versions of this chassis
How these numbers were settled
Sold with a graphite (MSR-021), aluminium (MSR-021A) or steel (MSR-021S) chassis plate.
- The manual's gear ratio table names the kit-standard 90T spur, a 21T drive pulley and 42T diff pulleys, and prints the secondary reduction as 2.0 (42T÷21T), with the formula spur ÷ pinion × 2.0.
- Yokomo's product page lists the motor, pinion, speed controller, tires and wheels as bought separately, so the final drive depends on the pinion fitted.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
- MS2.1 instruction manual (Yokomo PDF) (opens in a new tab)Gear ratio tableteamyokomo.comUsed forMain specs
This vehicle
- Yokomo Master Speed MS2.1 product page (opens in a new tab)teamyokomo.comUsed forMain specs
Parts and electronics
- Msr 020 (opens in a new tab)teamyokomo.comUsed forMain specs
- Yokomo 1 10 MS2 1 competition touring car kit (opens in a new tab)bigsquidrc.comUsed forMain specs
- Team yokomo master speed MS2 1 1 10 touring car (opens in a new tab)rccaraction.comUsed forMain specs
