The WLtoys 184008-B is a small four-wheel-drive brushless truck with independent suspension and LED lighting. Its 2838 5000KV motor and compact combined electronics are intended for fast off-road running rather than low-speed crawling. Model information (opens in a new tab).
Read moreShow less
The documented package includes a 7.4V 1200mAh battery and USB charging equipment. Zinc-alloy drivetrain gears and hydraulic shock absorbers are listed for this configuration. Keep the full model suffix when ordering body, chassis or suspension parts; a similar motor specification does not establish that every part matches the other truck. Model information (opens in a new tab).
The kind of vehicle the maker sells it as. It sets what the car is built to do and which cars it is fair to compare it with.
Monster trucks have tall tires and long suspension travel, built for jumping and rough ground rather than a race track.
Power
A brushless motor has no brushes to wear, so it makes more power and runs more efficiently than a brushed one.
It needs a brushless ESC.
Build
Ready to run: built at the factory with the electronics installed.
Some come without a battery or charger; the maker's box contents say which.
Scale
The maker's nominal size compared with a full-size vehicle. It works more as a class label than a measurement.
A 1/10 monster truck is far bigger than a 1/10 touring car, so compare length and weight for real size.
This one is 282 mm long.
Part number
The maker's product number for this exact version.
A V2, a new color, or a kit instead of an RTR usually has a different number, and parts can differ between them.
Check it against your box or receipt before ordering parts.
Class
Monster truck
Power
Brushless
Build
Ready to run
Scale
1/18
Part number
184008-B
Drivetrain
Pinion
The small gear on the motor shaft. Fewer teeth gear the car shorter: quicker acceleration, lower top speed and a cooler motor. More teeth do the opposite.
It depends on the motor you fit, so the maker does not list one.
Spur
The large gear the pinion drives. A bigger spur with the same pinion gears the car shorter.
Pinion and spur must have the same pitch, or tooth size, to mesh.
Transmission & axle
Every reduction after the spur, multiplied together: transmission, differentials and axle gears.
It is fixed by the design; the gearing you change is the pinion and spur.
Final drive
How many times the motor turns for one turn of the wheels. A higher number is shorter gearing: more acceleration and pulling power, less top speed.
Pinion
Not published
Spur
Not published
Transmission & axle
Not published
Final drive
Not published
Wheels & tires
Tire diameter
The outside diameter of the mounted tire, tread to tread. A taller tire covers more ground each turn, which gears the car taller.
At high speed tires can balloon and grow, so the real gearing gets taller as the car goes faster.
Tire diameter
Not published
Power
Motor
RPM per volt with no load on the motor. Higher KV spins faster on the same pack; lower KV on more cells can reach the same RPM with less current.
Under load the real RPM is lower.
Battery
The highest LiPo cell count the maker rates the electronics for.
The maker does not publish it.
Stock motor
The motor fitted at the factory, as the maker names it.
In a name like 2838, the digits usually give the can size: 28 mm across and 38 mm long. A bigger can makes more torque and sheds heat better.
We have not collected a parts list for this exact model. Check the manufacturer documents in Specs.
About these specs
Exact configuration is identified by model number. Published battery capacity describes the supplied pack; no unsupported maximum cell rating is inferred.
Model information (opens in a new tab)hobbytrend.co.nzPart pageSupports 5 specificationsRetailer listingUsed forMain specsWeightSizeElectronicsDrivetrainBackground