17 specifications across 6 groups, covering stock setup, dimensions and components.
Spec
Value
Basis
Vehicle
Class
The kind of vehicle the maker sells it as. It sets what the car is built to do and which cars it is fair to compare it with.
Buggies are low, light off-road cars built for jumps and fast corners on dirt, clay or turf tracks.
Drive
All four wheels are driven. That gives more grip under power, especially on loose ground.
The cost is more parts to maintain.
Power
A small two-stroke engine running glow fuel (methanol, nitromethane and oil).
It needs fuel, a glow igniter and some tuning.
It has no motor KV or battery rating.
Build
A kit you build yourself from parts.
Most kits come without motor, ESC, servo, radio and battery, and many without tires or a painted body.
The manual lists what to add.
Scale
The maker's nominal size compared with a full-size vehicle. It works more as a class label than a measurement.
A 1/10 monster truck is far bigger than a 1/10 touring car, so compare length and weight for real size.
This one is 497 mm long.
Part number
The maker's product number for this exact version.
A V2, a new color, or a kit instead of an RTR usually has a different number, and parts can differ between them.
Check it against your box or receipt before ordering parts.
Class
Buggy
Drive
4WD
Power
Nitro
Build
Kit
Scale
1/8
Part number
TLR04003
Drivetrain
Pinion
On a nitro car the gear on the engine is the clutch bell.
Its teeth work like a pinion's: more teeth gear the car taller, for more top speed and slower acceleration.
Spur
The large gear the pinion drives. A bigger spur with the same pinion gears the car shorter.
Pinion and spur must have the same pitch, or tooth size, to mesh.
On a nitro car the clutch bell drives it.
Transmission & axle
Every reduction after the spur, multiplied together: transmission, differentials and axle gears.
It is fixed by the design; the gearing you change is the pinion and spur.
Final drive
How many times the motor turns for one turn of the wheels. A higher number is shorter gearing: more acceleration and pulling power, less top speed.
Among 1/8 buggies in the catalog, the middle half run between 10.3:1 and 12.1:1 on stock gearing; this one is 11.9:1.
Pinion
13TStock
Stock
Spur
48TStock
Stock
Transmission & axle
3.23:1Stock
Stock
Final drive
11.90:1Stock
Stock
Wheels & tires
Tire diameter
The outside diameter of the mounted tire, tread to tread. A taller tire covers more ground each turn, which gears the car taller.
Race tires wear down over a day, and a smaller tire gears the car shorter.
Tire diameter
Not published
Power
Motor
An engine has no KV rating.
Nitro engines are sized by displacement in cubic inches, such as .21.
Battery
An engine car has no drive battery.
A small receiver pack or a BEC powers the radio and servos.
Motor
Not applicable
Battery
Not applicable
Performance
Theoretical top speed
An engine has no KV, so a theoretical top speed cannot be worked out from the gearing alone.
Theoretical top speed
Not applicable
Size & weight
Length
Overall length as the maker states it, usually with the body fitted.
Useful for comparing real size, since scale labels are loose.
Width
Overall width as the maker states it, usually with the body fitted.
A wider car is more stable in corners and harder to roll over.
Height
Overall height as the maker states it, usually with the body fitted.
Useful when checking it fits a shelf, a bag or a car trunk.
Length
497 mm19.6 inStock
Stock
Width
308 mm12.1 inStock
Stock
Height
180 mm7.1 inStock
Stock
How to read these figures
Stock is as the vehicle ships.
Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
Not published means it exists but no source we could find prints it.
Catalog stock FDR: 11.90:1. The grid uses the listed tooth counts and internal ratio, so rounding or source differences may change the result slightly.
Calculated final drive ratio for each pinion and spur pair
Pinion
46T spur
48T spur
50T spur
11T
12T
13T
14T
15T
16T
Select a pair to compare wheel travel per motor turn with stock. Other cells are mathematical examples, not verified gears or fits. Check pitch, mesh, clearance and motor temperature before changing parts.