VehiclesTamiya TA07 RR Chassis Kit
Tamiya TA07 RR Chassis Kit Chassis
1/10 scale · 4WD touring chassis kit · 47445
Tamiya's TA07 RR Chassis Kit is a 1/10 four-wheel-drive, single-belt touring car kit built on the TA07 with a set of TRF option parts, sold without body, motor or tires.
Its 64T spur works through a 2.05:1 belt and axle stage, and Tamiya's table runs from 7.74:1 on a 17T pinion to 5.06:1 on a 26T. The chassis is 370 mm long and 187 mm wide on a 257 mm wheelbase. For club racing, check the class gearing rules before choosing a pinion, then enter it in the gearing tool.
- Transmission & axle
- 2.05:1
- Spur
- 64T
- Wheelbase
- 257mm
- Introduced
- 2020
Sold without a motor, so there is no stock KV: compare gearing by rollout.

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 4WD | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | 47445 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | 64TStock | Stock |
| Transmission & axle | 2.05:1Stock | Stock |
| Final drive | 5.06 to 7.74:1 on 26T to 17T pinionsMaker's chart | Maker's chart |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
| Size & weight | ||
| ||
| Length | 370 mm14.6 inStock | Stock |
| Width | 187 mm7.4 inStock | Stock |
| Wheelbase | 257 mm10.1 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
- Not published means it exists but no source we could find prints it.
- Maker’s chart is the ratios the maker prints for this chassis with the pinions it names.
Other versions of this chassis
How these numbers were settled
TA07 PRO single-belt 4WD touring chassis kit loaded with TRF option parts (double cardan front drive shafts, TRF420 front axle and gear differential, aluminium centre pulley, TRF-SSBB dampers).
- The English manual's gear ratio table (PDF p. 27) prints the formula 'Spur gear teeth (64T) / Pinion gear teeth x 2.05', with 7.74:1 on a 17T pinion down to 5.06:1 on a 26T, for 06 module pinions.
- The pinion supplied with the kit is not named on the page or in that table, so the pinion and the final drive are left blank.
- Body, motor, tires, wheels, radio and battery are sold separately, so there is no stock tire, motor or cell rating.
- Tamiya's Japanese page prints a 370mm chassis length, 187mm width and 257mm wheelbase.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
- TA07 RR instruction manual (Tamiya PDF, English) (opens in a new tab)gearing chart PDF p. 27tamiya.comUsed forMain specs
This vehicle
- Tamiya TA07 RR Chassis Kit product page (opens in a new tab)tamiya.comUsed forMain specsSize
Parts and electronics
- Std.csv (opens in a new tab)tamiya.comUsed forMain specs
