VehiclesHPI Racing Vorza Flux Buggy
HPI Racing
HPI Racing Vorza Flux Buggy
1/8 scale · 160178
- Top speed
- 46mphcalculated
- Final drive
- 13.76:1
- Tire
- 111mm
Open in Top Speedsourced
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | 15TStock | Stock |
| Spur | 48TStock | Stock |
| Transmission & axle | 4.30:1Stock | Stock |
| Spur ÷ pinion | 3.200:1Calculated | Calculated |
| Final drive | 13.76:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | 111mmStock | Stock |
| Rollout | 25.3mm per motor turnCalculated | Calculated |
| Power | ||
| Motor | 2200KVStock | Stock |
| Battery | Up to 6SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | 46.1mph on 6SCalculated | Calculated |
| Motor speed | 48,840rpm, no loadCalculated | Calculated |
| Vehicle | ||
| Part number | 160178 | |
| Scale | 1/8 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. The top speed is kinematic: an ideal no-load RPM with no slip and no loss under load, so a real car is slower.
How these numbers were settled
1/8 electric buggy.
- Internal is the spiral 10T pinion to 43T spiral diff gear.
- Pinion is 1-module.
- The Vorza S Flux Buggy (#160179) is mechanically identical (7075 instead of 6061 chassis) and is deliberately not listed separately.
Sources
- stdhpiracing.com (opens in a new tab)
- 160178hpiracing.com (opens in a new tab)
- 160280hpiracing.com (opens in a new tab)
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.