Yokomo YD-2S

Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.

How these numbers were settled

RWD, high-mount motor, 4-gear transmission, gear diff.

• Yokomo publishes the second reduction as 1:2.6 on the product page and again on the YD-2 series spec chart, and its own gear ratio chart is built on the same constant: 53T spur over 16T pinion is listed as 8.613, which is 53/16 x 2.6.
• A roller with no motor, gears, wheels or tires, so pinion, spur and the resulting total are the buyer's choice rather than missing data.
• Wheelbase 256mm; the 425mm on the same spec block is overall length, not wheelbase.

Sources

• dp-yd2steamyokomo.com (opens in a new tab)
• Manual (PDF)teamyokomo.com (opens in a new tab)
• Manual (PDF)teamyokomo.com (opens in a new tab)

Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.

More from Yokomo

• Master Drift MD3.0
• Rookie Drift RD2.0
• Super Drift SD3.0
• YD-2E
• YD-4
• YD-4 MR