VehiclesYokomo Super Drift SD3.0
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not applicable | |
| Spur | 80TStock | Stock |
| Transmission & axle | 2.60:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Up to 2SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | SDR-030 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
How these numbers were settled
RWD graphite double-deck with a selectable 3 or 4 gear rear bulkhead.
- The 80T spur is included and the pinion is not; the manual names 24T as the kit reference.
- Second reduction derived from the manual's own chart, which is 2.601 at 24T to 8.67 and 2.600 at 40T to 5.20.
- Yokomo does not print the constant for this chassis.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.