Shock service

Start with the correct reference

Exact kit fill, air removal and fully compressed shaft position when closing the cap. Check full compression after assembly. Optional shock/spring listings do not establish stock parts or a seal rebuild basket.

• GTS assembly and fill diagram, PDF p. 33 (opens in a new tab)

  Assembly drawing · 82216-4 TRX-4 assembly manual EN R00

  An assembly drawing shows the components; it does not provide a complete service sequence.

Parts, tools and consumables

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks

Oil-filled threaded, aluminum body, 3 mm shaft, front and rearSingle report

Sources

• Source 1: traxxas.com (opens in a new tab)
• Source 2: membership.rccaraction.com (opens in a new tab)
• Source 3: traxxas.com (opens in a new tab)

Shock bore

7 mm, front and rearSingle report

Sources

• Source 1: membership.rccaraction.com (opens in a new tab)

Shock length

90 mm listed length, front and rearStock

Sources

• Source 1: traxxas.com (opens in a new tab)
• Source 2: traxxas.com (opens in a new tab)
• Source 3: traxxas.com (opens in a new tab)

Front upper shock bolt

3 × 23mm buttonhead. Stock 82216-4 assemblyStock

Sources

• Source 1: traxxas.com (opens in a new tab)

Front lower shock bolt

3 × 27mm buttonhead. Stock 82216-4 assemblyStock

Sources

• Source 1: traxxas.com (opens in a new tab)

Rear upper shock bolt

3 × 23mm buttonhead. Stock 82216-4 assemblyStock

Sources

• Source 1: traxxas.com (opens in a new tab)

Rear lower shock bolt

3 × 27mm buttonhead. Stock 82216-4 assemblyStock

Sources

• Source 1: traxxas.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.