VehiclesTraxxas Slash 2WD BrushlessShock service
Maintenance reference
Shock service
Traxxas Slash 2WD Brushless · 58434-4
Traxxas Slash 2WD Brushless, 58434-4; original equipment covered by the cited edition.
← Vehicle service referenceStart with the correct reference
Check the shock service pages and the leak inspection guidance. The listed kit is the manufacturer reference for this edition, not a complete rebuild basket.
- Shock service, PDF p. 25 (opens in a new tab)
Maintenance guidance · 58434-4-OM-EN-R00.pdf
- Seal inspection and rebuild-kit reference, PDF p. 27 (opens in a new tab)
Maintenance guidance · 58434-4-OM-EN-R00.pdf
Parts, tools and consumables
Listed in the reference
- Shock rebuild kit for two shockspart
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)
The manual identifies this kit; inspect the lower seals for leakage before replacing.
Requirement source, PDF p. 27 (opens in a new tab) - 100% pure silicone shock oilconsumableRequirement source, PDF p. 25 (opens in a new tab)
Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.
Setup specifications
- Shocks
- Oil-filled threaded, composite body, 3.5 mm shaft, front and rearStock
- Shock length, front
- 85 mm listed lengthDerived from replacement part
- Shock length, rear
- 100 mm listed lengthDerived from replacement part
- Spring
- White (powder-coated) front and rearStock
- Front upper shock bolt
- 3 × 14mm buttonhead (2593). Stock 58434-4 assemblyStock
- Front lower shock bolt
- 3 × 15mm buttonhead (2579). Stock 58434-4 assemblyStock
- Rear upper shock bolt
- 3 × 14mm buttonhead (2593). Stock 58434-4 assemblyStock
- Rear lower shock bolt
- 3 × 15mm buttonhead (2579). Stock 58434-4 assemblyStock
- Front upper shock eye width
- 5. Exact 7461-STGRY; approximate replacement-derived eye width, listed Ø3 × 5 mm. Not bolt length or mounting clearance. mmDerived from replacement part
- Front lower shock eye width
- 7. Exact 7461-STGRY; approximate replacement-derived eye width, listed Ø3 × 7 mm. Not bolt length or mounting clearance. mmDerived from replacement part
- Front spring inner diameter
- 18. Exact 7461-STGRY; approximate replacement-derived spring ID, not spring rate or clearance. mmDerived from replacement part
- Rear upper shock eye width
- 5. Exact 7462-STGRY; approximate replacement-derived eye width, listed Ø3 × 5 mm. Not bolt length or mounting clearance. mmDerived from replacement part
- Rear lower shock eye width
- 7. Exact 7462-STGRY; approximate replacement-derived eye width, listed Ø3 × 7 mm. Not bolt length or mounting clearance. mmDerived from replacement part
- Rear spring inner diameter
- 18. Exact 7462-STGRY; approximate replacement-derived spring ID, not spring rate or clearance. mmDerived from replacement part
- Shock oil, front
- 20 wtStockConvert fluid grade
- Shock oil, rear
- 20 wtStockConvert fluid grade
Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.