Motor service

Traxxas Drag Slash Ford Mustang · 94346-74

Traxxas Drag Slash Ford Mustang, 94346-74; original configuration covered by this document.

← Vehicle service reference

Start with the correct reference

Maker-listed motor maintenance guidance for the original configuration.

Owner's manual, model 94346-74, PDF p. 23 (opens in a new tab)
Maintenance guidance · Traxxas 94346-74; cover-matched English edition 94346-74-OM-EN-R01.pdf

Parts, tools and consumables

Listed in the reference

Light electric motor oilconsumable
Only where the cited original motor maintenance calls for bearing or bushing lubrication.
Requirement source, PDF p. 23 (opens in a new tab)

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Motor: Velineon 3500Stock
Sources
Source 1: traxxas.com (opens in a new tab)
Source 2: traxxas.com (opens in a new tab)
Source 3: traxxas.com (opens in a new tab)
ESC motor connector: 3.5 mm bullet. Motor connection; nominal bullet size only where stated.Stock
Sources
Source 1: traxxas.com (opens in a new tab)
Motor mount material: 3.2 mm aluminum motor plate. Factory motor plate or cradle as labelled.Stock
Sources
Source 1: traxxas.com (opens in a new tab)
Stock motor shaft: 3 mmStock
Sources
Source 1: traxxas.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.