VehiclesTeam Losi Racing TEN-SCTE 2.0 Race Kit
Team Losi Racing TEN-SCTE 2.0 Race Kit
1/10 scale · short course · TLR03000

- Scale
- 1/10
- Drive
- 4WD
- Max LiPo
- -
- Power
- electric
Background
The TEN-SCTE 2.0 developed the original Losi rolling chassis into a Team Losi Racing assembly kit. Its revised weight distribution sat lower and farther rearward, and the battery rested on thin chassis-mounted pads instead of the earlier tray. Adjustable battery posts let the builder move the pack as part of the truck's balance settings. Factory product archive (opens in a new tab)
Read moreShow less
A 3 mm 7075-T6 aluminum chassis, revised differential cases with molded-in drive inserts and a new seal system were among the equipment changes. The clear short-course body used venting to manage the air trapped underneath during jumps. As with the original roller, the power system and radio were chosen by the owner, so a finished truck has no single factory motor Kv or pinion. Factory kit information (opens in a new tab)
The multilingual assembly manual and separate exploded reference identify the 2.0's exact service parts. Factory tuning notes and blank setup sheets cover suspension, differential fluids and battery placement, providing a useful record when rebuilding a used race truck. Identify any later chassis or drivetrain conversion before ordering parts against TLR03000. Factory assembly manual (opens in a new tab) Tuning notes (opens in a new tab)
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Short course | |
| Drive | 4WD | |
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | TLR03000 | |
| Drivetrain | ||
| ||
| Pinion | Not applicable | |
| Spur | 40TStock | Stock |
| Transmission & axle | 3.90:1Stock | Stock |
| Final drive | Not applicable | |
| Spur pitch | Mod 1Stock | Stock |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Suspension | ||
| ||
| Chassis | 7075-T6 aluminum3 mm thickStock | Stock |
| Shocks | Aluminum bodyfront and rearStock | Stock |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Battery retention | Foam pads on chassis; adjustable hold-down postsOriginal retention layout; no maximum bay dimensions inferred.Stock | Stock |
| In the box | ||
| ||
| Radio | Not includedStock | Stock |
| Drive battery | Not includedStock | Stock |
| Charger | Not includedStock | Stock |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
| Size & weight | ||
| ||
| Length | 524 mm20.6 inStock | Stock |
| Width | 296 mm11.6 inStock | Stock |
| Height | 185 mm7.3 inStock | Stock |
| Wheelbase | 334 mm13.1 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
Service reference
Checked task pages, documented requirements and recorded factory fluids for this model. Follow the manufacturer's procedure for the exact assembly and revision.
ShocksReference
Front and rear shocks
TLR03000 factory chassis with owner-selected completion equipment
Factory shock reference for this exact configuration. Follow its assembly and filling directions; no complete replacement basket is implied.
- Front and rear shocks, PDF pp. 36-38 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: TLR03000 exact TEN-SCTE 2.0 Race Kit factory manual.
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-22.
DifferentialsReference
Front differential; center and rear use their own later steps
TLR03000 factory chassis with owner-selected completion equipment
Exact differential reference. Match the installed differential and preserve its shims and configuration during service.
- Front differential; center and rear use their own later steps, PDF pp. 14-15 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: TLR03000 exact TEN-SCTE 2.0 Race Kit factory manual.
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-22.
DrivetrainReference
Center differential and drive installation
TLR03000 factory chassis with owner-selected completion equipment
Factory gearbox and drive reference. The stated parts and assembly sequence apply to this edition; owner conversions need separate identification.
- Center differential and drive installation, PDF pp. 23-26 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: TLR03000 exact TEN-SCTE 2.0 Race Kit factory manual.
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-22.
MotorReference
Owner-selected motor mounting
TLR03000 factory chassis with owner-selected completion equipment
Factory mounting reference for the chosen motor. It does not establish an installed stock motor or universal gearing.
- Owner-selected motor mounting, PDF p. 25 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: TLR03000 exact TEN-SCTE 2.0 Race Kit factory manual.
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-22.
Steering servoReference
Owner-selected steering servo and horn
TLR03000 factory chassis with owner-selected completion equipment
Factory steering-servo reference. Match the chosen servo, horn and mounting arrangement; no universal spline compatibility is claimed.
- Owner-selected steering servo and horn, PDF pp. 40-41 (opens in a new tab)Assembly drawing, not a rebuild procedure. Document: TLR03000 exact TEN-SCTE 2.0 Race Kit factory manual.
Documented parts and requirements
No separate parts, tools or prerequisites have been indexed for this task. Read the cited reference before starting.
This is a partial service reference. Check the cited instructions for the full procedure and configuration-specific requirements. Mechanical tasks may need additional parts, quantities and reused hardware beyond the items listed here. Manual reviewed 2026-10-22.
No factory fluid grades are recorded here. That does not establish whether this vehicle uses oil, grease or friction components.
Manuals & assembly references
Indexed tasks link to checked physical PDF pages. Other links open full documents. Tasks and rebuild requirements not shown here still need review.
Build and setup
Factory setup guide for this configuration.
Rebuild the TEN-SCTE 2.0's center differential to the complete factory diagram, including the cross pins, shims, seals and tightening order. Its starting instruction is 5,000-weight fluid just above the planetary gears, rather than a housing filled to the brim. Keep the cover screws evenly seated in the illustrated crossed sequence. This belongs to the 2.0 race kit, whose differential setup should not be confused with the grease-filled original rolling chassis.[1] TEN-SCTE 2.0 Race Kit factory setup and maintenance instructions (opens in a new tab)
Keep the front and rear shock assemblies distinct when servicing the truck. The manual uses different bodies, shafts and numbered pistons at the two ends, so laying the parts out separately helps preserve the intended setup. Follow the motor-mount and center-differential installation together after choosing the motor and pinion; the illustrated pinion is a completion item, not a supplied gearing promise.[1] TEN-SCTE 2.0 Race Kit factory setup and maintenance instructions (opens in a new tab)
OEM parts
5 x 11 Sealed Ball Bearings (2)
12 x 18 x 4 Sealed Ball Bearings (2)
10 x 15 x 4 Sealed Ball Bearings with Plastic Retainer (2)
6 x 12 x 4 Sealed Ball Bearings with Plastic Retainer (2)
Front and Rear Gearbox Set
40T Spur Gear, Mod1: TEN SCTE
Center Front CV Driveshaft Assembly
Turnbuckle Kit, Titanium: 8B 2.0
Front Suspension Arm Set
Rear Suspenion Arm Set: 10-T
Front Shock Tower, Machined Aluminum
Rear Shock Tower, Machined Aluminum
Front Shock Body, Hard Annodized: Ten
Rear Shock Body, Hard Annodized: Ten
Front and Rear Shock Plastics and Ball Set (4)
Steering
More document pages (2)
Steering Bellcrank Set
Steering Posts/Tube and Hardware
Steering Drag Link and Hardware
F/R Camber/Steering Turnbuckle Set
Steering/Throttle/Brake Link Set
Servo Mount: SCTE 2.0
Servo Saver Tube, Hard Anodized: SCTE
Motor Mount with Adapter
7075 Motor Adapter: SCTE 2.0
Wheel Set (2)
Chassis Brace and Spacer Set (3)
Body Posts
Rear Bumper Pack
Front Bumper Pack
Body Mount Spacers (4): SCTE 2.0
Hi Performance SCT Body
5-40 x 1 7/8 Button Head Screws
4-40 x 3/8 Button Head Screws
2-56 x 1/2 Button Head Screws
5-40 x 1/2 Cap Screws
4-40 x 1/2 Button Head Screws
8-32 x 1/4 Flat Head Screws
8-32 x 3/8 Flat Head Screws
5-40 x 3/8 Flat Head Screws
Unclassified
More document pages (7)
4-40 Setscrew
8-32 x 1/4 Setscrews
10-32 x 3/8 Setscrews
High-Pressure Black Grease
Front Spindles and Carriers
Rear Hubs and Spacers
Rear Hubs, Aluminum
Pivot Ball Set, Hard Anodized (16): Ten
115 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
Sources
5 source links for this model.
Read moreShow less
- Manuals, exploded views, and setup sheets.
- Vehicle product and specification pages.
Links open in a new tab.
Maker documents
3- TEN-SCTE 2.0 Race Kit factory manual (opens in a new tab)Supports 3 specificationsUsed forMain specsGearingServiceBackground
- TEN-SCTE 2.0 Race Kit factory parts and exploded reference (opens in a new tab)Supports 2 specificationsUsed forMain specsGearing
- TEN-SCTE 2.0 Race Kit factory blank setup sheet (opens in a new tab)Supporting reference
This vehicle
2- Team Losi Racing TEN-SCTE 2.0 Race Kit product page (opens in a new tab)Supports 5 specificationsUsed forMain specsSizeSuspensionPowerIn the boxBackground
- Team Losi Racing TEN-SCTE 2.0 Race Kit product page (opens in a new tab)Background referenceUsed forBackground