VehiclesTeam Magic B8ER II RTR
Team Magic
Team Magic B8ER II RTR
1/8 scale · buggy · TM560022
- Final drive
- 10.80:1
Open in Top Speedsourced

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not published | |
| Spur | Not published | |
| Transmission & axle | 3.91:1Derived | Derived |
| Final drive | 10.80:1Stock | Stock |
| Wheels & tires | ||
| Tire diameter | Not published | |
| Power | ||
| Motor | 2500KVStock | Stock |
| Battery | Up to 4SLiPoStock | Stock |
| Performance | ||
| Theoretical top speed | Not published | |
| Vehicle | ||
| Part number | TM560022 | |
| Scale | 1/8 | |
| Class | Buggy | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how. Not published means it exists but no source we could find prints it.
How these numbers were settled
Team Magic Europe prints a gear ratio of 10.8:1, stored as the total.
- The page lists 43T/11T machined bevel gears, so the ratio after the spur is taken as 43/11 = 3.91, assuming the spur sits on the centre differential as on other 1/8 buggies.
- The motor is a 2500KV brushless and the G2 130A ESC is rated for 3-4S.
- The stock pinion, the spur and the tire size are not published and are left blank.
- The 4S speed of 95 km/h is stated with a 19-tooth high speed pinion, so it is not a stock claim.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.