VehiclesTamiya TA08R Chassis Kit
Tamiya TA08R Chassis Kit Chassis
1/10 scale · 4WD touring chassis kit · 47498
Tamiya's TA08R Chassis Kit is a 1/10 four-wheel-drive, two-belt touring car kit with option parts fitted, sold without body, motor or tires.
Its gearbox and axle stage after the spur is 1.85:1, so the spur and pinion you fit decide the final drive. It is 373 mm long on a 257 mm wheelbase. Enter your spur and pinion in the gearing tool before you race.
- Transmission & axle
- 1.85:1
- Spur
- 71T
- Wheelbase
- 257mm
- Introduced
- 2024
Sold without a motor, so there is no stock KV: compare gearing by rollout.

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Touring | |
| Drive | 4WD | |
| Build | Kit | |
| Scale | 1/10 | |
| Part number | 47498 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | 71TStock | Stock |
| Transmission & axle | 1.85:1Stock | Stock |
| Final drive | 4.69 to 7.73:1 on 28T to 17T pinionsMaker's chart | Maker's chart |
| Wheels & tires | ||
| ||
| Tire diameter | Not applicable | |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
| Size & weight | ||
| ||
| Length | 373 mm14.7 inStock | Stock |
| Width | 182 mm7.2 inStock | Stock |
| Wheelbase | 257 mm10.1 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
- Not published means it exists but no source we could find prints it.
- Maker’s chart is the ratios the maker prints for this chassis with the pinions it names.
Other versions of this chassis
How these numbers were settled
Limited TA08 with option parts fitted, a front direct coupling in place of the front differential and a TRF420 front direct pulley (37T); the page also names a '71Tスパーギヤ(TRF420センタープーリー)' among its parts.
- Tamiya prints no gear ratio for the kit itself; its 2026 All-Japan Championship rules list the TA08(R) on a 110T spur with a 29T pinion at 7.02:1, which gives the ratio after the spur: 7.02 x 29/110 = 1.851; the 2024 rules list the TA08 on 116T/30T at 7.15:1 (1.849).
- The manual's gear table (PDF p. 25; the MB42 71T is the kit-standard spur, a 110T MB43 is also in the box) prints 'Spur gear teeth (71T) / Pinion gear teeth x 1.85', which gives the kit spur and the ratio after it.
- The pinion is not on the list of items to buy, and the page does not give its size, so the pinion and the final drive are left blank.
- Tires, motor and speed controller are sold separately.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
- TA08R instruction manual (Tamiya PDF) (opens in a new tab)d7z22c0gz59ng.cloudfront.net
This vehicle
- Tamiya TA08R Chassis Kit product page (opens in a new tab)tamiya.comUsed forMain specsSize
- Tamiya TA08R Chassis Kit product page (opens in a new tab)tamiya.comUsed forMain specs
Parts and electronics
- Regulation ALLJAPAN2026 2 (PDF) (opens in a new tab)tamiya.comUsed forMain specs
- REGULATION2024RCCGP (PDF) (opens in a new tab)tamiya.comUsed forMain specs
