VehiclesTamiya King Hauler

- Scale
- 1/14
- Drive
- -
- Max LiPo
- -
- Power
- electric
Background
The King Hauler is a 1/14-scale radio-control truck assembly kit. The conventional cab and sleeper give it the appearance of a long-haul American tractor. Its twin driven rear axles distinguish it from a simple two-axle road car. Model and configuration (opens in a new tab).
Read moreShow less
Its ladder-frame chassis uses metal components to reproduce a full-size truck's construction. Leaf-spring suspension and rear-axle drive put the emphasis on scale hauling and careful low-speed control. The transmission changes gear through the radio, so the steering servo and shift linkage need to be set up together. Chassis and controls (opens in a new tab).
Start with a freely turning drivetrain and reliable gear selection before adding heavier loads or accessories. A shift servo that pushes beyond the gearbox's required travel adds strain without improving the engagement. Follow the exact kit instructions when setting linkages and control travel. Factory model reference (opens in a new tab).
Plan the electronics before filling the cab and chassis with extra equipment. Tamiya's optional sound-and-light control systems add scale functions, but the radio, speed control and accessory package vary by market. The international kit identity here does not include equipment shown only for a Japanese full-set package. Regional equipment notes (opens in a new tab).
Specifications
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Power | Motor not included | |
| Build | Kit | |
| Scale | 1/14 | |
| Part number | 56301 | |
| Drivetrain | ||
| ||
| Pinion | 10TStock | Stock |
| Spur | Not published | |
| Transmission & axle | Not published | |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | Not published | |
| Power | ||
| ||
| Motor | Not published | |
| Battery | Not published | |
| Performance | ||
| ||
| Theoretical top speed | Not published | |
| Size & weight | ||
| ||
| Length | 600 mm23.6 inStock | Stock |
| Width | 183 mm7.2 inStock | Stock |
| Height | 255 mm10 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not published means it exists but no source we could find prints it.
Build and setup
Factory setup guide for this configuration.
Set up the steering and all three transmission positions before adding loads. Keep the drivetrain free and confirm clean gear engagement with the wheels lifted first.[1] Tamiya 56301 factory reference (opens in a new tab)[2] Tamiya 56301 factory reference (opens in a new tab)
Choose the radio and speed control as a system. Lights, sound, tipping or towing accessories add their own controls and installation requirements; retain the exact kit and accessory instructions.[1] Tamiya 56301 factory reference (opens in a new tab)[2] Tamiya 56301 factory reference (opens in a new tab)
OEM parts
Drivetrain
1113T Gear
20T Gear
1150 Sealed Ball Bearing Set (4 pcs.)
1150 Sealed Ball Bearing Set (2 pcs.)
1260 Sealed Ball Bearing Set (2 pcs.)
Ring Gear
Front Axle
Electronics
1Motor
Chassis & body
1Body
Unclassified
23A Parts (A1-A3)
B Parts (B1 & B2)
Propeller Shaft (Short)
Propeller Shaft (Long)
Tool Set
7.2V Connector Set
Nylon Band Set
Heat Resistant Double-Sided Tape
36 collected part numbers. Collected . Unmarked parts are recorded listings, without a claim about factory installation; optional and upgrade listings are tagged. Key assemblies include recorded gear and shock identifiers. Open a part for its listing sources.
About these specs
Three-speed scale-truck kit; the installed gear, regional electronics and driven rear tire must be selected before estimating speed.
Sources
2 source links for this model.
Read moreShow less
- Manuals.
- Vehicle product and specification pages.
Links open in a new tab.
Maker documents
1- Tamiya 56301 factory instructions (opens in a new tab)Supports 1 specificationUsed forMain specs
This vehicle
1- Tamiya King Hauler product page (opens in a new tab)Supports 2 specificationsUsed forMain specsSizeBackground
