VehiclesRlaarlo SLEVO 1/7 Chassis Assembly
Rlaarlo SLEVO 1/7 Chassis Assembly
1/7 scale · rally · SL-071
Rlaarlo's SLEVO 1/7 Chassis Assembly is the four-wheel-drive rally chassis of the SLEVO, sold without motor, ESC, servo, radio, battery or body.
Its 46T spur drives a 3.58:1 stage to the wheels, so the final drive is 46 divided by the pinion, times 3.58. It rolls on 100 mm tires. Choose the motor and pinion together in the gearing calculator before buying either, since the pair sets both the top speed and how hot the motor runs.
- Tire
- 100mm
Sold without a motor, so there is no stock KV: compare gearing by rollout.

Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Vehicle | ||
| ||
| Class | Rally | |
| Drive | 4WD | |
| Power | Motor not included | |
| Build | Roller / ARR | |
| Scale | 1/7 | |
| Part number | SL-071 | |
| Drivetrain | ||
| ||
| Pinion | Not published | |
| Spur | 46TStock | Stock |
| Transmission & axle | 3.58:1Derived | Derived |
| Final drive | Not published | |
| Wheels & tires | ||
| ||
| Tire diameter | 100mmStock | Stock |
| Power | ||
| ||
| Motor | Not applicable | |
| Battery | Not applicable | |
| Performance | ||
| ||
| Theoretical top speed | Not applicable | |
| Size & weight | ||
| ||
| Length | 646 mm25.4 inStock | Stock |
| Width | 272 mm10.7 inStock | Stock |
| Height | 215 mm8.5 inStock | Stock |
| Wheelbase | 374 mm14.7 inStock | Stock |
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Derived is worked out from gear tooth counts the maker publishes rather than printed as a ratio; the notes below say how.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor.
- Not published means it exists but no source we could find prints it.
How these numbers were settled
This is the SLEVO chassis assembly without motor, servo, ESC, battery, radio and body, so the motor, cell rating and pinion are the builder's.
- The chassis page prints the tire as 100 x 38mm.
- The spur and the ratio after it come from the SLEVO manual (p. 18): a 46T central spur, a 43T differential ring gear and a 12T differential pinion, which is 3.58:1.
- Rlaarlo's page for this assembly does not repeat those tooth counts, and it does not say whether a pinion is in the box, so the pinion and final drive are left blank.
Sources
Every figure on this page traces to one of these; where they disagreed, the note above says which was used and why. Links open in a new tab.
Maker documents
1- SLEVO user manual (Rlaarlo PDF) (opens in a new tab)Supports 1 specificationSpecifications p. 18Used forMain specs
Parts and electronics
2- 1 7 RC rally car slevo chassis assembly (opens in a new tab)Supports 2 specificationsUsed forMain specsSize
- 46T spur gear steel for dsk buggy (opens in a new tab)Supports 1 specificationUsed forMain specs
More from Rlaarlo
All Rlaarlo vehicles
Mitsubishi EVO 6.5 TME SLEVO-07 RTR1/7 · SLEVO-07-RTR-R
XTS-F10 Carbon Fiber Roller1/10 · XTS-F10-Roller
XTS-F10 Carbon Fiber RTR1/10 · XTS-F10L-C
XTS-F10 Metal RTR1/10 · XTS-F10Z-A- No photo yetXTS-P12 Rally Car RTR1/12
XTS-S10 RTR1/10 · XTS-S10
Dragon Scale Knight (DSK) Kit1/8 · DSK08-KIT- All Rlaarlo vehicles
