Vehicles/Primal RC Primal MT V4
Primal RC Primal MT V4
1/5 scale · monster truck · PRMT
Specs- Tire
- 304.8mm
Engine powered, so there is no motor KV: compare gearing by rollout.
Photo: Primal RC (opens in a new tab)Specifications
Last modified
18 specifications across 6 groups, covering stock setup, dimensions and components.
| Spec | Value | Basis |
|---|
| Vehicle |
|---|
- Class
The kind of vehicle the maker sells it as. It sets what the car is built to do and which cars it is fair to compare it with. - Monster trucks have tall tires and long suspension travel, built for jumping and rough ground rather than a race track.
- Drive
All four wheels are driven. That gives more grip under power, especially on loose ground. - The cost is more parts to maintain.
- Power
A two-stroke engine running gasoline mixed with oil, used on the largest cars. - It has no motor KV or battery rating.
- Build
Ready to run: built at the factory with the electronics installed. - Some come without a battery or charger; the maker's box contents say which.
- Scale
The maker's nominal size compared with a full-size vehicle. It works more as a class label than a measurement. - A 1/10 monster truck is far bigger than a 1/10 touring car, so compare length and weight for real size.
- This one is 1,003 mm long.
- Part number
The maker's product number for this exact version. - A V2, a new color, or a kit instead of an RTR usually has a different number, and parts can differ between them.
- Check it against your box or receipt before ordering parts.
|
| Class | Monster truck | |
|---|
| Drive | 4WD | |
|---|
| Power | Gas | |
|---|
| Build | Ready to run | |
|---|
| Scale | 1/5 | |
|---|
| Part number | PRMT | |
|---|
| Drivetrain |
|---|
- Pinion
On a nitro car the gear on the engine is the clutch bell. - Its teeth work like a pinion's: more teeth gear the car taller, for more top speed and slower acceleration.
- Spur
The large gear the pinion drives. A bigger spur with the same pinion gears the car shorter. - Pinion and spur must have the same pitch, or tooth size, to mesh.
- On a nitro car the clutch bell drives it.
- Transmission & axle
Every reduction after the spur, multiplied together: transmission, differentials and axle gears. - It is fixed by the design; the gearing you change is the pinion and spur.
- Final drive
How many times the motor turns for one turn of the wheels. A higher number is shorter gearing: more acceleration and pulling power, less top speed.
|
| Pinion | Not published | |
|---|
| Spur | Not published | |
|---|
| Transmission & axle | Not published | |
|---|
| Final drive | Not published | |
|---|
| Wheels & tires |
|---|
- Tire diameter
The outside diameter of the mounted tire, tread to tread. A taller tire covers more ground each turn, which gears the car taller. - At high speed tires can balloon and grow, so the real gearing gets taller as the car goes faster.
|
| Tire diameter | 304.8mmStock | Stock |
|---|
| Power |
|---|
- Motor
An engine has no KV rating. - Nitro engines are sized by displacement in cubic inches, such as .21.
- Battery
An engine car has no drive battery. - A small receiver pack or a BEC powers the radio and servos.
|
| Motor | Not applicable | |
|---|
| Battery | Not applicable | |
|---|
| Performance |
|---|
- Theoretical top speed
An engine has no KV, so a theoretical top speed cannot be worked out from the gearing alone.
|
| Theoretical top speed | Not applicable | |
|---|
| Size & weight |
|---|
- Weight
The vehicle's weight as the maker states it. - The maker does not say whether it includes a battery.
- More weight takes more power to accelerate and lands harder on the parts; it changes top speed very little.
- Length
Overall length as the maker states it, usually with the body fitted. - Useful for comparing real size, since scale labels are loose.
- Height
Overall height as the maker states it, usually with the body fitted. - Useful when checking it fits a shelf, a bag or a car trunk.
- Wheelbase
The distance between the front and rear axle centers. A longer wheelbase is steadier at speed and over bumps; a shorter one turns more tightly.
|
| Weight | 38.56 kg (85 lb)Stock | Stock |
|---|
| Length | 1003 mm39.5 inStock | Stock |
|---|
| Height | 610 mm24 inStock | Stock |
|---|
| Wheelbase | 610 mm24 inStock | Stock |
|---|
How to read these figures
- Stock is as the vehicle ships.
- Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart.
- Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit.
- Not published means it exists but no source we could find prints it.
No parts collection yet
We have not collected a parts list for this exact model. Check the manufacturer documents in Details.
Sources
1 source link for this model.
Vehicle product and specification pages.
Read moreShow less