VehiclesMST RMX 2.0 S
Specifications
Last modified
| Spec | Value | Basis |
|---|---|---|
| Drivetrain | ||
| Pinion | Not applicable | |
| Spur | Not applicable | |
| Transmission & axle | 3.08:1Stock | Stock |
| Final drive | Not applicable | |
| Wheels & tires | ||
| Tire diameter | Not applicable | |
| Power | ||
| Motor | Not applicable | |
| Battery | Not published | |
| Performance | ||
| Theoretical top speed | Not applicable | |
| Vehicle | ||
| Part number | 532161 | |
| Scale | 1/10 | |
Stock is as the vehicle ships. Calculated is worked from the stock figures on this page rather than stored beside them, so the two cannot drift apart. Not applicable means the vehicle does not come with it, like the motor on a roller or the tires on a race kit, or does not have one, like a KV rating on a brushed motor. Not published means it exists but no source we could find prints it.
How these numbers were settled
RWD.
- The one current MST drift chassis that publishes its transmission constant: five changeable second reduction sets from 1.89 to 3.82, standard 3.08.
- The companion RRX 2.0 S setup sheet lists the sets as tooth pairs, 32/18 at 1.78 through 42/11 at 3.82, which is six rather than the five the product page counts. 3.08 is the 40T/13T set.
- Wheelbase 257mm.
Sources
Every figure on this page traces to one of these. Where they disagreed, the note above says which was used and why.