Maintenance reference

Shock service

30622 assembly kit; owner-selected electronics

Start with the correct reference

The linked assembly documents air removal, filling and spring installation. Baseline is200 with frontA/rearC pistons; high-traction300–400 withB pistons is a tuning alternative.

Shock assembly and oil filling, PDF pp. 20-21 (opens in a new tab)
Assembly drawing · 30622 exact product-linked 30622 MM01 copyright2021
An assembly drawing shows the components; it does not provide a complete service sequence.
Baseline piston and shock oil combination, PDF p. 32 (opens in a new tab)
Assembly drawing · 30622 exact product-linked 30622 MM01 copyright2021
An assembly drawing shows the components; it does not provide a complete service sequence.

Parts, tools and consumables

Listed in the reference

Shock oil equivalent to Kyosho #200consumable
Original shocks and baseline frontA/rearC pistons in this manual edition
Requirement source, PDF p. 32 (opens in a new tab)

Part links open an exact-model OEM listing. Quantities, reused hardware and condition-dependent replacements may need checking in the manual. A listed part is not an instruction to replace it.

Setup specifications

Shocks: Oil-filled front and rearStock
Sources
Source 1: rc.kyosho.com (opens in a new tab)

Keep the axle positions and original units shown. Values describe the cited configuration. Replacement-derived and community figures keep their stated basis.